Skip to content
Two electricians bending metal conduit with a hand bender next to a solar array

Licensing

North Carolina Electrical License (2026): Classes, Experience, Exam and Renewal

By· Founder, Made For BuildersReviewed

Summary

North Carolina electrical licenses at a glance

The Board issues 10 classifications of electrical contracting license. Three are general: Limited, Intermediate and Unlimited, separated by the value of a single project. The other seven are Special Restricted licenses for one phase of work, such as single-family dwellings. Every classification needs experience, a passing exam score of 70 and an annual fee.

North Carolina electrical contractor licenses (NCBEEC pages and 21 NCAC 18B, checked 2026-11-10)
Limited (L)Intermediate (I)Unlimited (U)Special Restricted (7 classes)
Issued byState Board of Examiners of Electrical ContractorsSame BoardSame BoardSame Board
ScopeA single project up to $60,000, rated at not more than 600 voltsA single project up to $150,000Any project regardless of valueA limited phase of electrical work, such as single-family dwellings (SP-SFD)
Experience3,000 hours, at least 2,000 of them primary5,750 hours, at least 5,000 of them primary9,000 hours, at least 8,000 of them primary3,000 hours, at least 2,000 of them primary
Exam100 questions, 6 hours, pass mark 70100 questions, 6 hours, pass mark 70100 questions, 6 hours, pass mark 70Shorter exams (40 questions in 3 hours for most), pass mark 70
Exam fee$125$125$125$125
License fee$100 per year$150 per year$200 per year$100 per year
Bonding abilityNot listedStatement requiredStatement requiredNot listed
RenewalEvery year, 8 hours of continuing educationEvery year, 8 hours of continuing educationEvery year, 8 hours of continuing educationEvery year, 4 hours (8 hours for SP-SFD)
Source: NC State Board of Examiners of Electrical Contractors (ncbeec.org), Licensing, Examinations and FAQ pages and the Board's copy of Title 21 NCAC 18B. Experience hours are from Rule .0201; primary experience is hands-on installation work as defined in Rule .0202.

Requirements change

The Board sets these rules and fees and can change them between our checks. Confirm every requirement with the State Board of Examiners of Electrical Contractors before you apply, hire or quote.

Business vs personal

Do you need a license to run an electrical business in North Carolina?

Yes. Under G.S. 87-43, no person, partnership, firm or corporation may engage, or offer to engage, in the business of electrical contracting in North Carolina without a license in the right classification. The license belongs to the business, and a Qualified Individual who passed the exam is listed on it.

The statute defines electrical contracting as engaging or offering to engage in the business of installing, maintaining, altering or repairing any electric work. North Carolina ties the business license to a person: after you pass the exam and apply, you become the Qualified Individual, the qualified person holding the electrical license.

  • One Qualified Individual per place of business: each place of business of a licensed firm must have at least one listed qualified individual regularly on active duty to supervise and direct the electrical work.
  • Not everyone needs a license: the Board's FAQ answers "Do all persons in a firm have to hold a license? No." Employees work under the listed qualified individual.
  • One certificate at a time: no listed qualified individual may be indicated on more than one license certificate at the same time.
  • Name and display: all business, including advertising, must be conducted in the exact name in which the license is issued, and the current certificate must be displayed in your principal place of business.

Steps

Steps to get a North Carolina electrical contractor license

The path is experience first, then the exam application with the $125 fee, then the exam with PSI, then the license application with the annual fee. The Board asks for 5 to 10 business days to approve an exam application, and you get a 90-day window to schedule and take the exam.

  1. Experience and exam

    Applicants must be at least 18 years of age and submit written statements from at least two persons attesting to their good character. Document your hours on the Board's Employer Statement Forms: 3,000 hours for Limited or SP-SFD, 5,750 for Intermediate and 9,000 for Unlimited. Under Rule .0202, 2,000 hours of primary experience equal one creditable year. Send the exam application with the $125 fee, which is non-refundable. Exams are computer based at PSI centers in Asheville, Charlotte, Fayetteville, Greenville, Raleigh, Wilmington and Winston Salem. The exam is open book: you may use the NEC (2020 Edition), NFPA 72 and the NASCLA business guide. You need 70 to pass and get your score the same day. If you fail, you must wait 90 days to retake the same exam; a review of a failed exam costs $25.

  2. Insurance and bond

    Intermediate and Unlimited applicants must furnish a bonding ability statement or a line of credit letter issued by a bank, savings bank or savings and loan association. The Board pages and rules we read do not set a statewide insurance amount for an electrical license. Your customers, general contractors and local permit offices may still ask for proof of insurance, so check before you quote.

  3. Business registration

    The SBA says you need to choose a business structure before you register your business with the state, and most states require registration with the Secretary of State's office or a business agency. If you incorporate, the Board asks for documents showing you are registered with the North Carolina Department of the Secretary of State. The IRS issues an EIN online, in minutes and for free.

After passing, complete a New License Application for your classification and pay the license fee: $100 per year for Limited and Special Restricted, $150 for Intermediate and $200 for Unlimited. For the same steps in other states, see the electrical contractors license guide and master electrician license.

Paperwork on a clipboard being filled out inside a work vehicle

Keeping the license

Renewing a North Carolina electrical license

North Carolina electrical licenses expire one year after the date of issuance and renew every year. The renewal period opens 60 days before expiration. Qualified individuals on Limited, Intermediate, Unlimited and SP-SFD licenses complete 8 hours of continuing education per year, and late renewals pay a $25 administrative fee.

  • Timing: renewal applications and fees are due 30 days before the expiration date (Rule .0405). The Board sends renewal notices about 60 days before expiration.
  • Continuing education: 8 hours per year for Unlimited, Intermediate, Limited and SP-SFD qualified individuals; 4 hours per year for the other special restricted classes. Half of the hours must be classroom.
  • Late renewal: a $25 administrative fee applies to renewals received after the expiration date. Within 12 months of expiration you can renew without further examination.
  • Expired more than 12 months: reactivation requires a Reactivation Application with verification of 500 hours of primary experience in the most recent twelve months, plus fees and continuing education.

The same renewal questions for plumbing licenses in our five markets are answered in plumbing license renewal.

Moving to North Carolina

Licensed in another state: reciprocity

Under G.S. 87-50 the Board may license contractors from other states without a written exam. It has formal reciprocal agreements with the boards of Alabama, Florida, Georgia, Mississippi, Ohio, South Carolina, Tennessee, Texas, Virginia and West Virginia. Each state has its own eligibility rules and application packet on the Board's site.

Electrical contractors licensed by those boards may obtain a North Carolina electrical contracting license without written examinations, if they meet that agreement's conditions. Click your state on the Board's reciprocity page for its eligibility rules and application packet.

Other states

Electrical licenses in the other states we cover

North Carolina is one of five US markets in the Partner Program, with Texas, Florida, Georgia and Arizona. Each has its own regulator and classes. The state-by-state comparison, with sources and check dates, is in the electrical contractors license guide.

First jobs

After the license: getting your first electrical jobs

With the license active, the work is filling the calendar at a margin. Start with your own Google Business Profile and website, add one or two lead sources, and measure each one by cost per closed job rather than cost per lead.

Licensed and ready for work?

Through the Partner Program, we build and run a local brand for your trade and ZIP codes. You answer the calls and do the work. The commission is 20% of the labor on service and repair jobs, and 15% of the net on installations and replacements, with no setup fee and no monthly fee: how commission works. You do the work under your own license and insurance. We are not a contractor.

FAQ

North Carolina electrical license questions

How long does it take to become a certified electrician in NC?

The experience sets the pace. The Limited exam needs 3,000 hours and the Unlimited exam needs 9,000 hours, and the Board's rule counts 2,000 hours of primary experience as one creditable year. Nationally, the BLS says most electricians learn their trade in a 4- or 5-year apprenticeship program.

How hard is the NC electrical exam?

The Board does not publish pass rates. The Limited, Intermediate and Unlimited exams have 100 multiple-choice questions in 6 hours, are open book (NEC 2020, NFPA 72 and the NASCLA business guide) and need a score of 70. The general contractor exam is run by a different board and is not covered here.

How much do electricians charge per hour in NC?

We did not find an official North Carolina hourly figure we could cite. The BLS reports a national median annual wage of $63,190 for electricians in May 2025; the highest 10 percent earned more than $108,510. To set your own rate from your costs, use the electrician hourly rate guide.

How do I renew my North Carolina electrical license?

Renew every year, online or with a mailed renewal form, during the 60 days before expiration. Qualified individuals on Limited, Intermediate, Unlimited and SP-SFD licenses need 8 hours of continuing education per year, half of it classroom. Renewals received after the expiration date pay a $25 administrative fee.

Does North Carolina accept electrical licenses from other states?

Only through reciprocal agreements. The Board has them with Alabama, Florida, Georgia, Mississippi, Ohio, South Carolina, Tennessee, Texas, Virginia and West Virginia. Contractors licensed by those boards may get a North Carolina license without written examinations.

Next steps

Where to go from here

  • Your trade

    How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.

    See your trade
  • Run your numbers

    A free calculator to check the margin on a job before you price it.

    Open the calculator
  • Working in this state

    Who regulates your trade here, the official sources and where we are recruiting partners.

    See the state page
  • Licensing

    What you need to run a trade business legally, from official sources.

    All licensing guides
  • How the Partner Program works

    We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.

    See the Partner Program
  • Apply to the Partner Program

    Calls from your own area under a local brand. Commission only on closed jobs.

    Apply

Last reviewed: