Skip to content
Plumber in a hard hat and safety glasses holding a pipe wrench on a renovation job

Licensing

Plumbing License Renewal: Cycles, Continuing Education and Late Fees by State

By· Founder, Made For BuildersReviewed

Summary

Plumbing license renewal rules at a glance

In the five states we cover, a plumbing license renews every one or two years. Continuing education ranges from none in North Carolina to 14 classroom hours per biennium in Florida. Every state charges more after the deadline, and every state has a point after which you must apply or test again.

Plumbing license renewal in five states (statutes, board rules and board pages, checked 2026-11-10)
TexasNorth CarolinaGeorgiaFloridaArizona
RegulatorTexas State Board of Plumbing Examiners (TSBPE)State Board of Examiners of Plumbing, Heating and Fire Sprinkler ContractorsState Construction Industry Licensing BoardConstruction Industry Licensing BoardRegistrar of Contractors (ROC)
CycleEvery yearEvery year, expires December 31Every two yearsEvery 2 yearsBiennial license (an annual renewal option costs half)
Continuing education6 hours a year, 3 on health protection, energy and water conservationNone since December 31, 20128 hours in the 24 months before expiration14 classroom hours per biennium, 1 on laws and rulesNone in the statute sections we read
Renewal fee$75 Master, $40 Journeyman, $35 Tradesman, $15 Apprentice, $300 RMPNot stated on the renewal pages we readSet by the Board in a separate scheduleUp to $250 certified, up to $200 registered (statutory caps)Specialty residential up to $270; commercial up to $900; dual up to $1,170
Late renewal1-1/2 times the fee up to 90 days; 2 times up to two years$25 more if not paid in January; no grace periodLate renewal period with a late fee from the Board scheduleLicense becomes delinquent; late and delinquency fees set by Board ruleSuspended the next business day; $50 to reactivate within one year
Start overExpired two years or more: new license, including the examMore than three years: reexaminationReinstatement more than 3 years after expiration: examStill delinquent at the end of the licensure cycle: license voidSuspended more than one year: new application
Sources: Texas Occupations Code ch. 1301 and TSBPE license pages; nclicensing.org FAQ and License Renewal pages; Ga. Comp. R. & Regs. r. 121-4-.02 and 121-4-.04 (secondary source: Cornell LII copy); Florida Statutes ss. 489.107, 489.109, 489.115 and 489.116; Arizona Revised Statutes 32-1101, 32-1125, 32-1125.01 and 32-1126.

Requirements change

Boards set fees and continuing education rules and can change them between our checks. Confirm your deadline, fee and hours with your state's regulator before you renew.

Expired license

Can you keep working while your plumbing license is expired?

No, in any of the five states. Texas says a person whose license has expired may not engage in activities that require a license until it is renewed. North Carolina says there is no grace period. Florida bars contracting without an active status certificate, and Arizona suspends the license the business day after its renewal date.

  • Texas: an expired license, endorsement or registration does not allow the work until it is renewed (s. 1301.403).
  • North Carolina: the Board writes that there is NO GRACE PERIOD following the expiration of a license.
  • Georgia: if not renewed by the expiration date, licenses or certificates shall be deemed invalid (Rule 121-4-.02).
  • Florida: a certificateholder or registrant may not engage in contracting unless the certificate or registration has active status (s. 489.116).
  • Arizona: the license is suspended on the next business day following its renewal date by operation of law (A.R.S. 32-1125). A contractor license in good standing is required to act as a contractor (32-1151).

The BLS notes that most states and some localities require plumbers to be licensed, so a lapse is not a paperwork detail. See how to start a plumbing business for how each state ties the business to a license.

Steps

Steps to renew a plumbing license on time

Renewal is three checks before the deadline: the continuing education hours your state requires, the insurance or bond your regulator keeps on file, and the business details on your license record. Some regulators send a notice first: Texas at least 31 days before expiration and Florida at least 60 days before the end of the cycle.

  1. Continuing education

    Texas: 6 hours of CPE before you may renew a Master, Journeyman, Tradesman or Apprentice license. Georgia: 8 hours within the 24 months before expiration; 4 hours if first licensed less than two years before, and none before the first renewal if licensed less than one year. Keep Georgia course records for at least five years. Florida: 14 classroom hours of at least 50 minutes each per biennium, with part on workers' compensation, business practices and workplace safety, and 1 hour on laws and rules. North Carolina eliminated mandatory continuing education in 2012.

  2. Insurance and bond

    Florida requires an affidavit of workers' compensation, public liability and property damage insurance as a prerequisite to renewal (s. 489.115). In Arizona, a renewal received on time with a valid bond or cash deposit on file lets the contractor keep operating until the renewal license is issued. Residential contractors in Arizona also pay an assessment of not more than $600 per biennial period to the recovery fund.

  3. Business registration

    Check that the name, address and qualifier on your license match your business. Texas law asks you to notify the board of any change of name or address within 30 days of receiving the expiration notice. If you changed your business structure since the last renewal, update the regulator before you renew.

Young man studying course material with a pen at a table

State by state

Renewal details in each Partner Program state

Each of the five Partner Program markets handles late renewals differently. Texas multiplies the fee, North Carolina adds $25, Georgia uses a late renewal period, Florida moves the license to delinquent status and Arizona suspends it. The details below come from each state's statute, rules or board pages.

  • Texas: licenses are valid for one year. Up to 90 days late you pay 1-1/2 times the renewal fee; from 90 days to two years, two times. TSBPE lists, for a Master Plumber, a $75 renewal fee and a $37.50 late renewal fee under 90 days. After two years you need a new license, including the exam. More: Texas state plumbing license.
  • North Carolina: every license expires December 31; renewal opens 90 days earlier, usually October 1. If you do not pay during January, the Board adds $25. An expired license can be renewed for up to three years with back fees and late fees; after that, reexamination. More: North Carolina plumbing license.
  • Georgia: Master and Journeyman Plumber licenses renew biennially. Renewal, late and reinstatement fees are set by the Board. A license not renewed lapses, and reinstatement more than 3 years after expiration requires passing the exam again. More: Georgia plumbing license.
  • Florida: certified and registered contractors renew every 2 years. Statute caps the renewal fee at $250 for a certificate and $200 for a registration, and lets the Board set delinquency fees of up to the renewal fee, plus an additional late fee for delinquent licensees. You can elect active or inactive status at renewal. More: Florida plumbing license.
  • Arizona: the statute sets biennial renewal fees by license type and a $50 penalty for late renewal. An inactive license can last up to five years at a time and needs no exam to reactivate. More: Arizona market page.

Licensed in electrical work too? North Carolina's electrical board runs a different cycle: see the North Carolina electrical license guide. For all five states side by side, see plumbing license by state.

Keeping work coming

After renewal: keeping the calendar full

A renewed license keeps you legal; it does not fill the schedule on its own. Keep your Google Business Profile and website current, add one or two lead sources, and measure each by cost per closed job rather than cost per lead.

Licensed and ready for work?

Through the Partner Program, we build and run a local brand for your trade and ZIP codes. You answer the calls and do the work. The commission is 20% of the labor on service and repair jobs, and 15% of the net on installations and replacements, with no setup fee and no monthly fee: how commission works. You do the work under your own license and insurance. We are not a contractor.

FAQ

Plumbing license renewal questions

How many continuing education hours do I need to renew a plumbing license?

It depends on the state. Texas requires 6 hours a year, Georgia 8 hours in the 24 months before expiration, and Florida 14 classroom hours per biennium. North Carolina eliminated mandatory continuing education on December 31, 2012, and the Arizona statute sections we read set none.

What happens if my plumbing license expires?

You must stop licensed work until you renew, and you pay more. Texas charges 1-1/2 times the fee up to 90 days late, North Carolina adds $25 after January, and Arizona charges a $50 penalty. Wait too long and you start over: two years in Texas, three in North Carolina and one year in Arizona.

Is there a grace period for plumbing license renewal?

Not for working. North Carolina says there is no grace period, Texas bars licensed activity while expired, and Arizona suspends the license the next business day. Some states allow a late renewal window with higher fees, but that window does not let you work on an expired license.

How often do you renew a plumbing license?

Every year in Texas and North Carolina. Every two years in Georgia and Florida. Arizona contractor licenses are biennial, with an annual renewal option at one-half of the biennial fee.

Do I need to retake the plumbing exam if my license lapsed?

Only after a long lapse. Texas requires the exam again once a license has been expired for two years or more. North Carolina requires reexamination after three years, and Georgia requires the exam for reinstatement more than 3 years after expiration. Arizona requires a new application after one year of suspension.

Sources

Sources

Sources

  1. Texas Occupations Code ch. 1301 (Plumbers) (opens in a new tab)Accessed
  2. TSBPE: Training and Education (CPE) (opens in a new tab)Accessed
  3. TSBPE: Master Plumber (opens in a new tab)Accessed
  4. TSBPE: Journeyman Plumber (opens in a new tab)Accessed
  5. TSBPE: Tradesman Plumber-Limited (opens in a new tab)Accessed
  6. TSBPE: Apprentice (opens in a new tab)Accessed
  7. TSBPE: Responsible Master Plumber (opens in a new tab)Accessed
  8. NC Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors: FAQ (opens in a new tab)Accessed
  9. NC Board: License Renewal (opens in a new tab)Accessed
  10. NC Board: Education (opens in a new tab)Accessed
  11. Ga. Comp. R. & Regs. r. 121-4-.02 (secondary source: Cornell LII copy of the official rule) (opens in a new tab)Accessed
  12. Ga. Comp. R. & Regs. r. 121-4-.04 (secondary source: Cornell LII copy of the official rule) (opens in a new tab)Accessed
  13. Florida Statutes s. 489.107 (Construction Industry Licensing Board) (opens in a new tab)Accessed
  14. Florida Statutes s. 489.109 (fees) (opens in a new tab)Accessed
  15. Florida Statutes s. 489.115 (renewal, continuing education) (opens in a new tab)Accessed
  16. Florida Statutes s. 489.116 (inactive and delinquent status) (opens in a new tab)Accessed
  17. Arizona Revised Statutes 32-1101 (definitions) (opens in a new tab)Accessed
  18. Arizona Revised Statutes 32-1125 (renewal of license) (opens in a new tab)Accessed
  19. Arizona Revised Statutes 32-1125.01 (inactive license) (opens in a new tab)Accessed
  20. Arizona Revised Statutes 32-1126 (fees) (opens in a new tab)Accessed
  21. Arizona Revised Statutes 32-1151 (contracting without license prohibited) (opens in a new tab)Accessed
  22. BLS Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab)Accessed

Next steps

Where to go from here

  • Your trade

    How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.

    See your trade
  • Run your numbers

    A free calculator to check the margin on a job before you price it.

    Open the calculator
  • Licensing

    What you need to run a trade business legally, from official sources.

    All licensing guides
  • How the Partner Program works

    We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.

    See the Partner Program
  • Apply to the Partner Program

    Calls from your own area under a local brand. Commission only on closed jobs.

    Apply

Last reviewed: