Skip to content
Undermount kitchen sink with a brass pull-down faucet set in a white quartz countertop

Pricing tools

Flat Rate Pricing for Plumbers (2026): How to Build Your Prices

By· Founder, Made For BuildersReviewed

Check a flat rate price before it goes in your book

Enter the flat price, the materials, your labor cost and the hours the task really takes, plus overhead as a percentage of direct cost. The calculator returns net profit, true margin, true markup and profit per hour. It runs in your browser and sends nothing.

The job numbers
$

What you charge for the whole job, before tax.

$

Everything you buy for this job.

$

What the labor costs you, including your own time.

h

Total hours spent, not just the billable ones.

12 %

Truck, insurance, office and admin, allocated as a % of direct cost.

Margin and markup are not the same thing. Margin is profit as a share of the price; markup is profit as a share of the cost. A 30% markup leaves only a 23% margin. Most contractors confuse the two and undercharge without realizing it.
Your true profit on this job
Net profit$2,680what you actually keep after covering cost and overhead
True margin17.9 %
True markup21.8 %
Total cost incl. overhead$12,320
Profit per hour$22
Total cost$12,320
Profit$2,680

Directional model. The common mistake is ignoring overhead and treating markup as margin. Allocate your real overhead on top of direct cost: true profit is almost always lower than the quote makes it look.

Flat rate pricing inputs at a glance

Only one input on this page comes from a public source: what labor costs. BLS publishes wages and employer benefit costs. Nobody publishes a reliable national flat rate for plumbing tasks, so the price itself has to come from your own costs, task times and margin target.

What you can look up and what you have to measure
InputFigureSource and date
Median wage, plumbers, pipefitters and steamfitters$63,800 a year (about $30.67 an hour at 2,080 hours)BLS Occupational Outlook Handbook, May 2025
Wage rangeLowest 10%: under $44,150. Highest 10%: over $108,420BLS Occupational Outlook Handbook, May 2025
Benefits share of employer compensation cost30.0% (private industry, all occupations)BLS Employer Costs for Employee Compensation, June 2026
Typical flat rate price per taskNo reliable sourceNot published by BLS or any primary source we found
Your overhead and task timesYour own books and job recordsMeasure, do not copy
The hourly equivalent is our arithmetic: $63,800 divided by 2,080 hours.

How to set a flat rate price: the formula behind the calculator

Flat price = (book hours x loaded labor cost per billable hour + materials) x (1 + overhead %) / (1 - target margin). The calculator works the same equation backwards: you type a price and it tells you what margin that price really leaves after labor, materials and overhead.

  1. Book hours

    How long the task takes on an average job, including setup and cleanup. Use your own job records, not a guess.

  2. Loaded labor cost

    Wage plus payroll taxes, insurance and benefits, spread over the hours you can actually bill.

  3. Materials

    Your cost for the parts that task normally uses.

  4. Overhead

    Truck, insurance, office, software, phones and marketing, as a share of direct cost.

  5. Target margin

    The share of the price you want to keep as profit. Margin is on price, not on cost.

Cost of labor: start from the wage, then load it

The BLS puts the median plumber wage at $63,800 a year in May 2025, about $30.67 an hour. That is what a plumber is paid, not what an hour of plumber costs you. Add employer benefits and taxes, then divide by billable hours rather than paid hours.

According to the BLS Occupational Outlook Handbook, the median annual wage for plumbers, pipefitters and steamfitters was $63,800 in May 2025. The lowest 10% earned less than $44,150 and the highest 10% more than $108,420. Use your own payroll if you have one; the BLS figure is a national reference point for a new hire or for checking your own pay.

Load it. The BLS Employer Costs for Employee Compensation release reports that in June 2026 private-industry employers spent an average of $46.89 per hour worked, and that benefit costs accounted for 30.0% of that. If your benefits share matched that all-industry average, a $30.67 wage would cost about $43.81 per paid hour ($30.67 / 0.70). That is an example, not a plumbing figure: your workers' comp class, payroll taxes and health plan set your real number.

Spread it over billable hours. Drive time, estimates, supply runs and callbacks are paid but not billed. In our example a plumber bills 6 of 8 paid hours, so the cost per billable hour is $30.67 / 0.70 x 8 / 6 = $58.42. Replace the 6 with your own figure from timesheets.

Overhead: the costs no single job pays for

Overhead is everything you pay to stay open that is not labor or materials on a specific job: vehicles, insurance, licensing, office, software, phones and lead costs. The calculator applies it as a percentage of direct cost, so take last year's overhead and divide it by last year's direct job cost.

  • Trucks: payments, fuel, maintenance and insurance.
  • Liability insurance, bonds and license renewals (see how to start a plumbing business for what a new shop needs).
  • Office, dispatch and bookkeeping time, software and phones.
  • Marketing and lead costs. Per-lead fees and commissions on closed jobs belong here or, if they vary by job, in that job's cost (compare sources in plumbing leads).
  • Tools and equipment that wear out across many jobs.

The slider stops at 30%

The calculator caps overhead at 30% of direct cost. If your books show more, put the excess into your loaded labor cost per hour so the total still reaches the price.

Margin vs markup: the same 30% is two different prices

Margin is profit divided by the price. Markup is profit divided by cost. A 30% markup leaves a 23.1% margin, and a 30% margin needs a 42.9% markup. Price on markup while thinking in margin and every flat rate in the book comes in low.

Markup needed for a target margin (arithmetic, not a benchmark)
Target marginDivide cost byEquivalent markup on cost
20%0.8025.0%
25%0.7533.3%
30%0.7042.9%
35%0.6553.8%
40%0.6066.7%

No primary source publishes an average margin for plumbing flat rates, so this page does not quote one. The calculator flags any margin under 15% as thin, because one callback or price rise on parts can erase it. Convert between the two with the price book calculator.

White PEX lines connected to a row of chrome compression fittings on a manifold

Worked example: pricing one task

Example only, with round numbers: a 2-hour task, $60 of materials, $58.42 loaded labor per billable hour and 25% overhead costs $221.05. At a 30% target margin the price is $315.79, rounded to $320. The calculator confirms a 30.9% margin and $98.75 net profit.

Example task (illustrative inputs, not a market price)
LineCalculationAmount
Labor2.0 book hours x $58.42$116.84
MaterialsAt cost$60.00
Direct costLabor + materials$176.84
Overhead25% of direct cost$44.21
Full costDirect + overhead$221.05
Price at 30% margin$221.05 / 0.70$315.79, set at $320

To check it, enter price $320, materials $60, labor $117, hours 2 and overhead 25%. The calculator returns $98.75 net profit, a 30.9% margin, a 44.6% markup and $49.38 profit per hour.

Flat rate vs time and materials: when each one works

Flat rate fixes the price before work starts, so you carry the risk on time and the customer knows the cost. Time and materials bills actual hours and parts, so the customer carries that risk. Flat rate pays off when your book hours are accurate; T&M fits work you cannot scope.

Same task, same $320 price, different reality on site (example inputs in the calculator, overhead 25%):

Actual time on siteLabor costNet profit at $320True margin
1.5 hours$88$135.0042.2%
2.0 hours (book time)$117$98.7530.9%
3.0 hours$175$26.258.2%
  • Flat rate fits repeat service tasks you have timed many times: the faster crews earn more per hour and the customer approves one number.
  • Time and materials fits open-ended work: hidden leaks, old piping, remodels where the scope can change after the wall comes off.
  • Equivalent T&M rate. With the example numbers, the hourly rate that gives the same result is $58.42 x 1.25 / 0.70 = $104.32 an hour, plus materials priced the same way. If that hourly figure looks high to you, the flat price was too low.

Plumbing work also runs outside office hours. The BLS notes that plumbers "are often on call to handle emergencies." Price after-hours work as its own line with its own labor cost, not as a discount on the day rate. Electricians and HVAC shops make the same choice: see the HVAC pricing guide and the electrical pricing guide.

Building the price list and using it on the job

Price every repeat task the same way, then keep the list honest: record actual time on every job, compare it with book time each quarter and reprice the tasks where they drift. A flat rate list is only as accurate as the task times behind it.

  1. List your repeat tasks

    Start with the 20 or 30 tasks you do most often. One line per task.

  2. Time them

    Use the average from your own job history, not the fastest job.

  3. Price each line

    Run each task through the formula above and check it in the calculator.

  4. Add options

    Repair, replace and upgrade lines for the same problem let the customer choose.

  5. Review quarterly

    Update materials costs and book hours. Reprice any task whose real margin has slipped.

The step-by-step version, with a line-by-line template and the markup vs margin calculator, is in Plumbing Price Book: Build Your Own, Line by Line. For a single job with unusual costs, use the job profit margin calculator.

Your prices are set. Now fill the schedule: partners get the calls from their area. 20% of the labor on service and repair jobs, 15% of the net on installations and replacements. No setup fee, no monthly fee, no pay-per-lead. Made For Builders is not a contractor.

Flat rate pricing FAQ

How do you calculate a flat rate price for plumbing?

Multiply book hours by your loaded labor cost per billable hour, add materials, add overhead as a percentage of that direct cost, then divide by one minus your target margin. Check the result in the calculator at the top of this page.

Is flat rate pricing better than hourly for plumbers?

Neither is better in general. Flat rate rewards accurate task times and fast crews; time and materials protects you on work you cannot scope. Many shops use flat rate for repeat service tasks and T&M for remodels and investigative work.

What margin should a plumber aim for?

No primary source publishes a reliable average for plumbing, so set it from your own numbers: what you need to cover callbacks, slow weeks and growth. The calculator marks anything under 15% as thin.

What happens when a flat rate job takes longer than planned?

You absorb the extra time. In the example on this page, a $320 task that takes 3 hours instead of 2 drops from a 30.9% margin to 8.2%. If that happens often, the book time is wrong and the task needs repricing.

Should I mark up materials in a flat rate?

In a flat rate the materials cost sits inside the price, so the target margin applies to it along with labor. If you price materials separately, use the markup vs margin table on this page so the uplift gives the margin you intend.

Sources and method

Wage and benefit figures come from the BLS pages below, read on 9 November 2026. Every other amount on this page is an illustrative example with round numbers, labelled as such. The hourly wage equivalent and the loaded labor cost are our arithmetic on the BLS figures.

Next steps

Where to go from here

  • Your trade

    How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.

    See your trade
  • Run your numbers

    A free calculator to check the margin on a job before you price it.

    Open the calculator
  • Pricing tools

    Calculators for rates, margins and job prices.

    All tools
  • How the Partner Program works

    We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.

    See the Partner Program
  • Apply to the Partner Program

    Calls from your own area under a local brand. Commission only on closed jobs.

    Apply

Last reviewed: