Skip to content
White full-size work van with a ladder rack, dappled in tree shade

Licensing

How to Start a Plumbing Business (2026): Licenses, Costs and First Jobs

By· Founder, Made For BuildersReviewed

By state

What each state requires to run a plumbing business

None of our five launch markets lets a plumbing company trade on a journeyman card alone: the owner, or a qualifying person on staff, must hold the master or contractor license. Below are the plumbing board in each state, the credential that covers the company and the hurdle that takes longest, as published on November 9, 2026.

Plumbing company licensing in Texas, Florida, Georgia, Arizona and North Carolina (checked 2026-11-09)
StatePlumbing boardCredential behind the companyLongest hurdleMarket page
TexasTexas State Board of Plumbing Examiners (TSBPE)Master Plumber who also holds the Responsible Master Plumber (RMP) designation$300,000 minimum general commercial liability cover; one company per RMPTexas
FloridaConstruction Industry Licensing Board, part of DBPRPlumbing Contractor: certified for the whole state, or registered for one localityFour years in the trade, one of them as a foreman (s. 489.111)Florida
GeorgiaPlumbers division of the State Construction Industry Licensing BoardMaster Plumber Class I (single-family and small buildings) or Class II (no limit)Five years of plumbing, two of them as a licensed JourneymanGeorgia
ArizonaRegistrar of Contractors (ROC)ROC contractor license, plumbing classificationA qualifying party with four years in the trade, plus a bond or cash depositArizona
North CarolinaBoard of Examiners of Plumbing, Heating and Fire Sprinkler ContractorsPlumbing contractor license4,000 hours (two years) of full-time field work before the examNorth Carolina
Local permits and city registrations come on top. Fees, exam detail and every source by state: plumbing license by state.

License

Do you need a license to run a plumbing business?

Yes. The BLS notes that most states and some localities require plumbers to be licensed, and that starting your own business may require additional licensing. In practice, that means a master or contractor license, or a qualifying person who holds one, before you sign contracts or pull permits in your own name.

Texas shows the difference clearly. A Journeyman or Master Plumber works under the supervision of a Responsible Master Plumber, and the RMP is responsible for the general supervision and management of plumbing work performed under contracts secured under his or her license. The RMP's duties include keeping the insurance, pulling permits and ensuring that all service vehicles display the company name. To open your own company in Texas, you either become an RMP or hire one.

Florida law says a person must be certified or registered to engage in the business of contracting, and contracts entered into by an unlicensed contractor are unenforceable by that contractor. Arizona makes it unlawful to act or offer to act as a contractor without a license in good standing.

Steps

Steps to start a plumbing business

Licensing comes first because it takes years; the business paperwork takes days. According to the SBA, you choose a business structure before you register with the state, then get an EIN, open a business bank account and buy the insurance your state and clients require. The order below follows the SBA and IRS.

  1. 1. Get the license that lets you contract

    Texas requires at least 8,000 hours to sit the Journeyman exam and a Journeyman license held at least two years to sit the Master exam; Georgia, 5 years for Master Plumber; Florida, 4 years with 1 as a foreman; North Carolina, 4,000 hours. Detail by state: plumbing license.

  2. 2. Choose a business structure

    The SBA says sole proprietors can be held personally liable for the debts and obligations of the business, while LLCs protect you from personal liability in most instances. Plumbing work carries liability, so read the SBA's comparison and talk to a tax professional before you decide.

  3. 3. Register the business

    If you form a corporation or LLC, the IRS asks you to form it through the secretary of state before you apply for an EIN. The SBA adds that local governments determine registration, licensing and permitting requirements, so check your city and county too.

  4. 4. Get an EIN and a business bank account

    The IRS issues an EIN online, in minutes and for free, with a limit of 1 EIN per responsible party per day. The SBA says you can open a business bank account once you have your federal EIN.

  5. 5. Insurance and bond

    The SBA notes that you may be legally required to buy certain types of business insurance, and that taxes on employment insurance and workers' compensation vary by state. The Texas RMP must keep at least $300,000 of general commercial liability insurance. Arizona requires a surety bond or cash deposit, and an attestation of compliance with workers' compensation insurance rules, before it issues a license.

Backflow

Backflow testing: a second state license for a plumbing company

Testing backflow prevention assemblies is licensed separately from plumbing in Texas. The TCEQ says anyone who repairs or tests these assemblies must hold its license, and master or journeyman plumbing work counts toward the two years of experience it asks for. For a new company, it is recurring commercial work that sits next to service calls.

  • Scope: a TCEQ backflow prevention assembly tester may test and repair assemblies on domestic, commercial, industrial or irrigation service; fire lines need permanent employment with an approved fireline contractor.
  • Before applying: a high school diploma or GED, two years of approved experience and the 40-hour tester course.
  • Application and exam: a $111 fee to the TCEQ, then the written exam at a computer-based testing center; the training provider runs the practical part.
  • Keeping it: the license lasts three years, and renewal needs 24 hours of continuing education, 8 of them hands-on.

Cities and water utilities often keep their own list of registered testers on top of the state license, so ask the utility in each area you serve. Other launch states regulate backflow testers in their own way; check with the plumbing board or the drinking water program before you advertise the service.

Materials

Lead-free rules for the pipe and fittings you buy

Every potable-water job falls under the federal lead-free standard. The EPA explains that the Safe Drinking Water Act defines lead free as a weighted average of 0.25% lead across the wetted surfaces of pipes, fittings and fixtures, and 0.2% for solder and flux. Stock your van with certified product from day one.

The Act prohibits the "use of any pipe, any pipe or plumbing fitting or fixture, any solder, or any flux, after June 1986, in the installation or repair" of public water systems or plumbing that provides water for human consumption, unless it is lead free. Congress tightened the limit for wetted surfaces from 8% to the 0.25% weighted average with the Reduction of Lead in Drinking Water Act of 2011, and since September 1, 2023 manufacturers and importers must certify regulated plumbing products as lead free.

The law exempts devices used only for nonpotable service and a short list of products, including toilets, urinals, fill valves, shower valves and tub fillers. The EPA publishes a guide to the lead-free certification marks, which is the quickest way to check what a supply house sells you.

Costs

How much does it cost to start a plumbing business?

Nobody official adds up a startup budget for plumbers, so we list only the fees regulators print. In Texas, the TSBPE lists a $128.50 Master Plumber exam fee, a $25 processing fee, a $75 license fee and a $225 RMP fee; the TCEQ charges $111 to apply as a backflow tester (checked November 9 and 17, 2026).

Plumbing fees published by Texas regulators and the IRS
ItemAmountSource
Texas Master Plumber exam (paid to Pearson VUE)$128.50TSBPE
Texas Master Plumber exam processing fee$25TSBPE
Texas Master Plumber license, after passing$75TSBPE
Texas Responsible Master Plumber designation$225TSBPE
Texas RMP liability insurance (minimum coverage, not premium)$300,000 coverageTSBPE
Texas backflow prevention assembly tester application$111TCEQ
Federal EINFreeIRS
Premiums, a van, jetters, cameras, software and advertising vary with your area; the SBA notes that costs can vary significantly by location, and we do not guess at them. Florida, Georgia and North Carolina fees were not on the pages we read; Arizona's registrar sets the bond amount.

Before you commit to that spend, price a handful of typical calls in the job profit margin calculator, then turn the results into flat rate pricing for plumbing or a plumbing price book.

Row of new copper pipe couplings lined up on a workbench

Reciprocity

Opening a plumbing company in a second state

Expect to apply again. North Carolina's plumbing board states that there are no license reciprocity agreements with any other state, so applicants must meet its requirements and pass its exams. Texas accepts a journeyman or master license from another state as part of exam eligibility, but you still sit the Texas exam.

Each state's out-of-state applicant page is the place to start; our markets overview has a page per launch state.

First jobs

Licensed plumber, empty calendar: finding the first jobs

The phone matters more than the logo. New plumbing owners usually begin with a Google Business Profile, a basic website and reviews from their first customers, and only pay for leads once they know what a job leaves them. Judge every source by what each booked job cost you.

Have the license? We supply the calls

Made For Builders runs a local brand in your area and routes its plumbing calls to you. We charge 20% of the labor on service and repair, 15% of the net on installations and replacements, and there is no setup or monthly fee (commission details). Your license is verified before launch, and the work stays yours: we are not a contractor.

FAQ

Starting a plumbing business: questions

Is plumbing a good business to start?

That call is yours, not ours. What the BLS does publish is demand: employment of plumbers, pipefitters and steamfitters is projected to grow 7 percent from 2025 to 2035, with about 42,000 openings a year. Margins, competitors nearby and your license matter more.

Can I start a plumbing business without a master license?

It depends on the state. In Texas, the company works under a Responsible Master Plumber, who must hold a Texas Master Plumber license. An owner without that license would need to bring in an RMP, and an RMP can act for only one company at a time.

Do I need a separate license to test backflow preventers?

In Texas, yes. The TCEQ licenses backflow prevention assembly testers separately from the TSBPE plumbing licenses, and plumbing work counts toward its two-year experience requirement.

Do I need an LLC to start a plumbing business?

The SBA presents the structure as a choice with trade-offs: sole proprietors can be held personally liable for business debts, while an LLC protects you from personal liability in most instances. Check your state's rules and get tax advice before you choose.

Do I need an EIN?

The SBA says you need an EIN to pay federal taxes, hire employees and open a business bank account. The IRS issues it online, in minutes and for free. If you are forming an LLC or corporation, form it with the secretary of state first.

Sources

Sources

Sources

  1. TSBPE: Responsible Master Plumber (opens in a new tab)Accessed
  2. TSBPE: Master Plumber (opens in a new tab)Accessed
  3. TSBPE: Journeyman Plumber (opens in a new tab)Accessed
  4. TCEQ: Backflow Prevention Assembly Tester information and requirements (opens in a new tab)Accessed
  5. US EPA: Use of Lead Free Pipes, Fittings, Fixtures, Solder, and Flux for Drinking Water (opens in a new tab)Accessed
  6. Florida Statutes s. 489.107 (Construction Industry Licensing Board) (opens in a new tab)Accessed
  7. Florida Statutes s. 489.111 (licensure by examination) (opens in a new tab)Accessed
  8. Florida Statutes s. 489.113 (qualifications for practice) (opens in a new tab)Accessed
  9. Florida Statutes s. 489.128 (unlicensed contractors) (opens in a new tab)Accessed
  10. Georgia Secretary of State: About the Board of Conditioned Air Contractors (CILB divisions) (opens in a new tab)Accessed
  11. Ga. Comp. R. & Regs. r. 121-3-.02 (secondary source: Cornell LII copy of the official rule) (opens in a new tab)Accessed
  12. Arizona Revised Statutes s. 32-1151 (opens in a new tab)Accessed
  13. Arizona Revised Statutes s. 32-1122 (opens in a new tab)Accessed
  14. Arizona Revised Statutes s. 32-1152 (bonds) (opens in a new tab)Accessed
  15. NC Plumbing, Heating and Fire Sprinkler board: Applicant Information (opens in a new tab)Accessed
  16. SBA: Launch your business (opens in a new tab)Accessed
  17. IRS: Get an Employer Identification Number (opens in a new tab)Accessed
  18. BLS Occupational Outlook Handbook: Plumbers, Pipefitters, and Steamfitters (opens in a new tab)Accessed

Next steps

Where to go from here

  • Your trade

    How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.

    See your trade
  • Run your numbers

    A free calculator to check the margin on a job before you price it.

    Open the calculator
  • Licensing

    What you need to run a trade business legally, from official sources.

    All licensing guides
  • How the Partner Program works

    We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.

    See the Partner Program
  • Apply to the Partner Program

    Calls from your own area under a local brand. Commission only on closed jobs.

    Apply

Last reviewed: