Skip to content
Plumber in a yellow hard hat and hi-vis vest holds a pipe wrench in red work gloves beside a stripped wall

Licensing

State of Texas Plumbing License (2026): TSBPE License Types, Hours, Exams and Fees

By· Founder, Made For BuildersReviewed

Summary

Texas plumbing licenses at a glance

The TSBPE issues every statewide plumbing license and registration under Texas Occupations Code chapter 1301. Individuals move from Plumber's Apprentice to Tradesman Plumber-Limited or Journeyman, then Master. A business that offers plumbing must secure a Responsible Master Plumber (RMP), a Master Plumber who files proof of insurance with the Board.

Main TSBPE plumbing licenses (TSBPE, checked 2026-11-10)
LicenseWhat it allowsTo qualifyFees (TSBPE)Exam
Plumber's Apprentice (registration)Learn and assist under the direct supervision of a licensed plumberAt least 16 years old$15 registration, $15 renewalNone
Tradesman Plumber-LimitedPlumbing for one and two-family dwellings, under an RMP4,000 hours plus a 24-hour training course$36 exam, $35 license, $35 renewalWritten and practical
Journeyman PlumberInstall, change, repair, service or renovate plumbing, under an RMP8,000 hours plus a 48-hour training course$40 exam, $40 license, $40 renewalWritten and practical (from Apprentice)
Master PlumberInstall, change, repair, service or renovate plumbing, under an RMPJourneyman license held at least two years (or one year plus a DOL-approved program)$25 processing, $128.50 exam to Pearson VUE, $75 license, $75 renewalWritten
Responsible Master Plumber (designation)Offer plumbing through one company, pull permits, carry responsibility for the workTexas Master Plumber license and at least $300,000 of commercial liability insurance$225 designation, $300 renewalNone beyond the Master exam
Licenses, registrations and endorsements are valid for one year. Fees are those listed on each TSBPE license page; the Master exam fee is paid to Pearson VUE on the day of the exam. Drain cleaner and residential utilities installer registrations, endorsements and the Plumbing Inspector license are on the TSBPE site.

TSBPE, not TDLR

Many searches ask about a TDLR plumbing license, but plumbing has its own board: chapter 1301 defines the board as the Texas State Board of Plumbing Examiners. Under the Texas Sunset Act, the board is abolished and the chapter expires September 1, 2033, unless the Legislature continues it.

Business vs personal

Do you need a license to run a plumbing business in Texas?

Yes. Under section 1301.351, a person may not engage in plumbing without the proper license, registration or endorsement, and a person that advertises or offers plumbing must secure the services of a Responsible Master Plumber. Texas has no separate plumbing contractor exam: the company runs on its RMP's Master license.

The statute describes the RMP as a Master Plumber who allows the license to be used by one plumbing company, is authorized to obtain permits for plumbing work and assumes responsibility for the work done under it. TSBPE adds that the RMP is responsible regardless of whether the individuals performing the work are employees or subcontractors.

  • One company at a time: an RMP may act as the RMP of record for only one company at a time. A Plumbing Inspector license holder may not receive the designation.
  • Duties: obtaining all necessary permits and requesting all inspections, ensuring that everyone performing plumbing work holds a current license or registration, and ensuring that service vehicles display the company name.
  • Carry the card: a license or registration holder must carry it while engaged in plumbing.
  • Local registration: a plumbing contractor must also register with any municipality or political subdivision that requires registration (s. 1301.551).

Penalties

Under section 1301.508, it is an offense to engage in plumbing without the required license, endorsement or registration, or to employ a person who does not hold one. The offense is a Class C misdemeanor, and the board may also impose administrative penalties (s. 1301.701).

Steps

Steps to get a Texas plumbing license and open a plumbing business

Register as a Plumber's Apprentice first: hours worked before registration do not count. Log 8,000 hours and complete the 48-hour course to sit the Journeyman exam, hold that license for two years, pass the Master exam, then add the RMP designation with a certificate of insurance.

  1. Experience and exam

    The statute requires you to register as a plumber's apprentice before assisting a licensee. For the Journeyman exam you need at least 8,000 hours in the trade and a 48-hour training course; for Tradesman Plumber-Limited, 4,000 hours and a 24-hour course. Both courses include the OSHA 10-Hour Outreach Training, and the 48-hour course includes 18 hours on the commercial plumbing codes. Students enrolled in a training program approved by the US Department of Labor Office of Apprenticeship are exempt from those courses, and the Board may credit up to 1,000 hours of experience for the classroom portion of an approved program.

  2. Insurance and bond

    To become an RMP you submit proof of at least $300,000 of commercial liability insurance on a certificate of insurance. Chapter 1301 requires coverage of not less than $300,000 for all claims arising in a one-year period, for property damage or bodily injury. The TSBPE pages we read do not ask for a surety bond.

  3. Business registration

    The SBA says to choose a business structure before you register your business with the state, and that most states require registration with the Secretary of State's office or a business agency. The IRS issues an EIN online, in minutes and for free. Then add the RMP designation to your Master license through the TSBPE online system and pay the $225 fee.

Every applicant and examinee submits fingerprints. TSBPE says this is a one-time requirement: if the Board already has your fingerprint data, you do not submit it again.

Exams

The TSBPE plumbing exams

Pearson VUE delivers the TSBPE written exams, but your application must first be approved through the TSBPE. A written exam authorization is good for up to five attempts. Journeyman and Tradesman candidates coming from Apprentice also take a practical exam, offered only at the TSBPE locations in Austin and Waco.

  • Retakes: after a failed written attempt you wait at least 30 days, 60 days after a second failure and 90 days after each failure after that.
  • Practical portion: you must pass it within one year of passing the written exam to get your license.
  • Master exam: written only, according to Pearson VUE. The Master exam fee is $128.50, paid to Pearson VUE, plus a $25 processing fee paid to the TSBPE.
  • Statute: licenses are issued to applicants who pass a uniform, reasonable examination (s. 1301.352).

After you pass

Keeping a Texas plumbing license: renewal and continuing education

Texas plumbing licenses, registrations and endorsements are valid for one year. To renew, license holders complete at least six hours of continuing professional education each year, three of them on health protection, energy conservation and water conservation. Late renewals cost more, and a license expired for two years cannot be renewed.

  • Renewal fees: $300 for the RMP designation, $75 for a Master, $40 for a Journeyman, $35 for a Tradesman and $15 for an Apprentice registration.
  • Late renewal: up to 90 days after expiration, the renewal fee is 1-1/2 times the normal fee (s. 1301.403).
  • Expired two years or more: you may not renew and must qualify again, including the exam.
  • CPE: TSBPE says you are required to complete 6 hours of CPE before you may renew your license.

Moving to Texas

Licensed in another state?

Section 1301.3581 lets the Board waive prerequisites for an applicant whose license comes from a jurisdiction with substantially equivalent requirements. The applicant may not be required to take an exam if he or she has held an equivalent license in another jurisdiction for at least two years. You still apply like any other applicant.

Out-of-state plumbers can also use the regular route. TSBPE lets a Journeyman licensed in another state sit the Master exam after holding that license for at least two years, and a current out-of-state Journeyman or Master license exempts you from the 24-hour or 48-hour training course for the Tradesman and Journeyman exams.

Single-story wood-framed house under construction with rough-in electrical boxes on a new subdivision street

Other states

Plumbing licenses in the other states we cover

Texas is one of five US markets in the Partner Program. Each state licenses plumbers through its own regulator, with its own hours and exams, so check with each state's regulator before you take work across a state line. The comparison, with sources and check dates, is in our plumbing license guide.

First jobs

After the license: getting your first plumbing jobs

With the RMP designation in place, the work is filling the calendar at a margin. Start with your own Google Business Profile and website, add one or two lead sources, and measure each one by cost per closed job rather than cost per lead.

Licensed and ready for work in Texas?

Through the Partner Program, we build and run a local brand for your trade and ZIP codes. You answer the calls and do the work. The commission is 20% of the labor on service and repair jobs, and 15% of the net on installations and replacements, with no setup fee and no monthly fee: how commission works. You do the work under your own license and insurance. We are not a contractor.

FAQ

Texas plumbing license questions

How do I become a licensed plumber in Texas?

Register with the TSBPE as a Plumber's Apprentice ($15), then work under licensed plumbers. With 8,000 hours and a 48-hour training course you can apply for the Journeyman exam; with 4,000 hours and a 24-hour course, the Tradesman Plumber-Limited exam. Pass the written exam with Pearson VUE and the practical exam in Austin or Waco.

Is 35 too late to become a plumber?

The TSBPE apprentice page sets a minimum age of 16 and lists no maximum age. Hours count only after you register as an apprentice, so the earlier you register, the earlier the clock starts.

How long does it take to get a plumbing license in Texas?

It depends on hours, not school. The Journeyman exam requires at least 8,000 hours in the trade plus a 48-hour course, and the Master exam requires holding the Journeyman license for at least two years, or one year plus a training program approved by the US Department of Labor.

Can a plumber make $100,000 a year?

Some do. The BLS reports a national median annual wage of $63,800 for plumbers, pipefitters and steamfitters in May 2025, and the highest 10 percent earned more than $108,420. Those are employee wages; no official source publishes what Texas plumbing businesses earn.

Can a homeowner do their own plumbing in Texas?

Section 1301.051 says a property owner is not required to be licensed to perform plumbing in the property owner's homestead. Cities may still require permits, although the statute excludes some jobs, such as replacing faucets, garbage disposals or water closets, from the municipal permit requirement.

Next steps

Where to go from here

  • Your trade

    How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.

    See your trade
  • Run your numbers

    A free calculator to check the margin on a job before you price it.

    Open the calculator
  • Working in this state

    Who regulates your trade here, the official sources and where we are recruiting partners.

    See the state page
  • Licensing

    What you need to run a trade business legally, from official sources.

    All licensing guides
  • How the Partner Program works

    We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.

    See the Partner Program
  • Apply to the Partner Program

    Calls from your own area under a local brand. Commission only on closed jobs.

    Apply

Last reviewed: