Skip to content
Older tradesman kneels beside a toilet with a handheld meter, checking a bathroom floor

Pricing tools

Plumbing Pricing for Plumbing Businesses (2026): How to Set Your Prices

By· Founder, Made For BuildersReviewed

Check the margin on a plumbing price

Enter the price, the materials, the labor cost, the hours on the job and overhead as a percentage of direct cost. The calculator returns net profit, true margin, true markup and profit per hour, whichever pricing method produced the price. It runs in your browser and sends nothing.

The job numbers
$

What you charge for the whole job, before tax.

$

Everything you buy for this job.

$

What the labor costs you, including your own time.

h

Total hours spent, not just the billable ones.

12 %

Truck, insurance, office and admin, allocated as a % of direct cost.

Margin and markup are not the same thing. Margin is profit as a share of the price; markup is profit as a share of the cost. A 30% markup leaves only a 23% margin. Most contractors confuse the two and undercharge without realizing it.
Your true profit on this job
Net profit$2,680what you actually keep after covering cost and overhead
True margin17.9 %
True markup21.8 %
Total cost incl. overhead$12,320
Profit per hour$22
Total cost$12,320
Profit$2,680

Directional model. The common mistake is ignoring overhead and treating markup as margin. Allocate your real overhead on top of direct cost: true profit is almost always lower than the quote makes it look.

Plumbing pricing methods at a glance

Plumbing businesses price work in three ways: by the hour plus materials, by a flat rate per task, or by a quote for the whole job. The method decides who carries the risk if the job runs long. The cost underneath is the same, and so is the check: what margin is left.

Three ways to price plumbing work
MethodHow the price is setWho carries the time riskUsually fits
Hourly (time and materials)Billed hours x your hourly rate, plus materialsThe customerLeaks you cannot see, old piping, open-ended work
Flat rateA fixed price per task from your price bookYouRepeat service tasks you have timed many times
Quote per jobA fixed price for the whole scope after a site visitYou, within the written scopeInstalls, repipes, remodels and new construction
Which work fits which method is a judgment from how predictable the task is, not a published standard.
What you can look up and what you have to measure
InputFigureSource and date
Median wage, plumbers, pipefitters and steamfitters$63,800 a year (about $30.67 an hour at 2,080 hours)BLS Occupational Outlook Handbook, May 2025
Median wage at plumbing, heating and air-conditioning contractors$63,010 a yearBLS Occupational Outlook Handbook, May 2025
Benefits share of employer compensation cost30.0% (private industry, all occupations)BLS Employer Costs for Employee Compensation, June 2026
Typical price per task or per hourNo reliable sourceNot published by BLS or any primary source we found
Overhead, task times, target marginYour own books and job recordsMeasure, do not copy
The hourly equivalent is our arithmetic: $63,800 divided by 2,080 hours.

How to set the price: the formula behind the calculator

Price = (hours x labor cost per billable hour + materials) x (1 + overhead %) / (1 - target margin). An hourly rate, a flat rate and a job quote are three ways of packaging that number. The calculator runs it backwards: enter the price and it shows the margin you keep.

Cost of labor. According to the BLS, the median annual wage for plumbers, pipefitters and steamfitters was $63,800 in May 2025; the lowest 10% earned less than $44,150 and the highest 10% more than $108,420. At plumbing, heating and air-conditioning contractors the median was $63,010. That is pay, not cost: the BLS Employer Costs for Employee Compensation release reports that benefits made up 30.0% of private-industry employer compensation costs in June 2026. Then divide by the hours you bill, not the hours you pay, because drive time, estimates and supply runs earn nothing.

Overhead. Trucks, insurance, licensing, office, dispatch, software, phones and lead costs. The calculator applies overhead as a percentage of direct cost (labor plus materials): divide last year's overhead by last year's direct job cost to get yours.

Margin vs markup. Margin is profit divided by price; markup is profit divided by cost. A 30% markup leaves only a 23.1% margin, and a 30% margin needs a 42.9% markup. The full conversion table and a markup vs margin calculator are in the plumbing price book guide.

The wage is not the price

The BLS median tells you what a plumber is paid. What you charge has to cover that pay, the employer costs on top, the unbilled hours, overhead and profit. The plumber hourly rate page works that gap out step by step.

Hourly, flat rate or quote per job: when each one fits

Use flat rate where your task times are reliable, hourly where nobody can scope the work, and a written quote where the job is large enough to visit first. Most plumbing shops run all three, so the question is which work goes into which method, not which method to adopt.

  • Flat rate turns your cost into one number per task. Faster crews keep the time they save, slower jobs eat into your margin. How to build each flat price and what happens when a task overruns is covered in Flat Rate Pricing for Plumbers.
  • Hourly (time and materials) passes the time risk to the customer. It suits diagnosis and work behind walls. Your rate has to be a billed rate that already includes overhead and margin, not a wage.
  • Quote per job fixes the price for a written scope. It fits water heater swaps, repipes and remodels. Write down what is excluded, so a change in scope becomes a change order instead of lost margin.

Electrical and HVAC contractors face the same choice; compare the electrical pricing guide and HVAC pricing for contractors.

Worked example: one job, two pricing methods

Example only, with round hypothetical inputs: a 3-hour job, $90 of materials, $60 of labor cost per billable hour and 25% overhead costs $337.50. At a 30% target margin that is about $482, so the flat price is set at $485. Billed by the hour, the same targets give $107.14 an hour.

Same job, same targets (illustrative inputs, not market prices)
Actual time on siteFlat rate at $485: net profitFlat rate: true marginHourly at $107.14 + materials: true margin
2 hours$222.5045.9%30.0%
3 hours (planned)$147.5030.4%30.0%
4 hours$72.5014.9%30.0%
Hourly rate = $60 x 1.25 / 0.70 = $107.14; materials billed at $90 x 1.25 / 0.70 = $160.71. Flat rate rows: enter price $485, materials $90, labor $60 per hour on site, the hours shown and 25% overhead in the calculator above.

Billed by the hour, the margin stays at 30% however long the job takes, but the customer's bill moves. At a flat rate the customer's price stays fixed and your margin moves: up when the crew is fast, down to 14.9% when the job runs an hour long. That is why flat rate needs accurate book times and hourly suits work you cannot scope.

Service call fees, after-hours work and materials

Three items change plumbing prices beyond the main formula: the visit itself, work outside business hours and how materials are charged. Price each one from its own cost rather than as a discount or a surcharge picked by feel, and write the rule down so every technician quotes it the same way.

  • The visit. Drive time and diagnosis cost you labor even if the customer declines the repair. Price a trip or diagnostic charge from book time for the visit at your labor cost, plus overhead and margin, and state whether it is credited against the repair.
  • After-hours. The BLS notes that plumbers are often on call to handle emergencies. Night and weekend calls carry overtime or on-call pay and fewer jobs per shift, so price them as their own line with their own labor cost.
  • Materials. In a flat rate or a quote, materials sit inside the price and the margin applies to them. Billed hourly, set one markup rule for parts and check what margin it really gives.
Hands tighten a bathroom faucet with a hex key while water runs into the basin

Building the price list and using it on the job

Turn the method into a list: your 20 to 30 most common tasks with a flat price, an hourly rate for open-ended work and a quote template for larger jobs. Record actual time and parts on every job, compare them each quarter and reprice whatever drifts.

  1. Set your billed hourly rate

    From your real labor cost, billable hours, overhead and margin. Use the plumber hourly rate calculator.

  2. Build the flat rate lines

    One line per repeat task, from book hours, materials, overhead and margin. The step-by-step template is in the plumbing price book.

  3. Prepare a quote template

    Scope, exclusions, materials, labor hours, permits and payment terms for installs and remodels.

  4. Check every price

    Run flat prices and quotes through the calculator above, or the job profit margin calculator for a single job.

  5. Review quarterly

    Compare actual hours and parts with the list and reprice the tasks whose margin has slipped.

Licensing, insurance and bonding costs belong in overhead from day one; see how to start a plumbing business. Lead costs belong there too, or in the job's cost if they vary per job. In the Partner Program the cost per closed job is 20% of the labor on service and repair jobs and 15% of the net on installations and replacements. Details on the commission page.

Your prices are set. Now fill the schedule: partners get the calls from their area. One partner per trade per area. No setup fee, no monthly fee, no pay-per-lead. Made For Builders is not a contractor.

Plumbing pricing FAQ

How should a plumbing business price its services?

From cost upward: labor hours at your loaded cost per billable hour, plus materials, plus overhead, divided by one minus your target margin. Then package that number as a flat rate, an hourly rate or a job quote, depending on how predictable the work is.

How much does a plumber charge for 3 hours?

No primary source publishes a reliable national rate, so the answer is 3 times your own billed hourly rate plus materials. In the illustrative example on this page, $107.14 an hour gives $321.43 for labor before materials.

Is it better to charge hourly or flat rate for plumbing?

It depends on the work. Flat rate fits repeat tasks you have timed often; hourly fits work you cannot scope. In the example on this page a flat price that runs one hour over drops from a 30.4% margin to 14.9%, while hourly billing keeps 30%.

What margin should a plumbing business target?

No primary source publishes a reliable average for plumbing, so this page does not quote one. Set it from what you need to cover callbacks, slow weeks and growth. The calculator marks anything under 15% as thin.

Is there a plumbing pricing calculator?

Yes, at the top of this page. It takes your price, materials, labor cost, hours and overhead and returns profit, true margin, markup and profit per hour. It runs in your browser and sends nothing.

Sources and method

Wage, benefit and schedule information comes from the BLS pages below, read on 10 November 2026. Job prices, hours and costs on this page are illustrative examples with round hypothetical inputs, labelled as such. The hourly wage equivalent and the example results are our arithmetic.

Next steps

Where to go from here

  • Your trade

    How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.

    See your trade
  • Run your numbers

    A free calculator to check the margin on a job before you price it.

    Open the calculator
  • Pricing tools

    Calculators for rates, margins and job prices.

    All tools
  • How the Partner Program works

    We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.

    See the Partner Program
  • Apply to the Partner Program

    Calls from your own area under a local brand. Commission only on closed jobs.

    Apply

Last reviewed: