
Pricing tools
HVAC Pricing for Contractors (2026): Margin, Flat Rate Service and Maintenance Agreements
HVAC pricing starts from your full job cost and a target margin, not a markup: on an $8,000 replacement, a 30% margin means $11,428.57, a 30% markup only $10,400. Labor is the one public benchmark: the BLS median HVAC technician wage was $61,010 a year in May 2025. Test your numbers below.
ByEdu López Parada· Founder, Made For BuildersReviewed
Turn an HVAC job cost into a price
Enter the full cost of the job (equipment, parts, labor and its share of overhead), choose whether you price by margin or by markup, and set the percentage. The calculator returns the price to charge, the profit, and the real margin and markup that price gives. It runs in your browser and sends nothing.
What the job costs you to deliver, before any profit.
Margin = profit as a share of the price you charge. Markup = an uplift added on top of your cost.
The slice of the final price you keep as profit.
Directional model. Start from your real, full job cost (materials, direct labor, and a share of overhead). Markup is figured on cost, margin on the price you charge, so the same percentage means two different dollar amounts.
HVAC pricing inputs at a glance
BLS publishes what HVAC technicians are paid and what employers spend on benefits, and ENERGY STAR says how often a system should be checked. No primary source we found publishes what contractors charge for a replacement, a repair or a maintenance plan, so the price has to come from your own costs.
| Input | Figure | Source and date |
|---|---|---|
| Median wage, HVAC mechanics and installers | $61,010 a year (about $29.33 an hour at 2,080 hours) | BLS Occupational Outlook Handbook, May 2025 |
| Median wage at plumbing, heating and air-conditioning contractors | $60,030 a year | BLS Occupational Outlook Handbook, May 2025 |
| Benefits share of employer compensation cost | 30.0% (private industry, all occupations) | BLS Employer Costs for Employee Compensation, June 2026 |
| Recommended maintenance | Annual pre-season check-ups: cooling in spring, heating in fall | ENERGY STAR, read November 2026 |
| Typical replacement, repair or maintenance plan price | No reliable source | Not published by BLS or any primary source we found |
Margin vs markup: the number that sets an HVAC price
Margin is profit as a share of the price; markup is profit as a share of cost. On an $8,000 job cost, a 30% margin needs a price of $11,428.57, while a 30% markup gives $10,400. That $1,028.57 gap comes straight out of profit on every replacement priced on the wrong number.
| Target margin | Price | Profit | Same price as a markup on cost |
|---|---|---|---|
| 20% | $10,000.00 | $2,000.00 | 25.0% |
| 25% | $10,666.67 | $2,666.67 | 33.3% |
| 30% | $11,428.57 | $3,428.57 | 42.9% |
| 35% | $12,307.69 | $4,307.69 | 53.8% |
No primary source publishes an average HVAC margin, so this page does not quote one. Set the target from your own books: what you need for callbacks, warranty labor, slow months and growth. The full cost build, labor, equipment and overhead, with a service call and an install worked side by side, is in the HVAC pricing guide.
Pricing replacement and install work
On a replacement, equipment is most of the cost, so the job cost has to be complete before any margin goes on top: equipment and materials, crew hours at loaded cost, permits, disposal and refrigerant recovery, plus overhead. Leave any line out and the margin you think you have is lower in reality.
- Equipment and materials at current distributor cost, dated, including line sets, pads, thermostats and electrical.
- Crew hours at loaded cost. The BLS median wage is $61,010 a year (May 2025), $60,030 at plumbing, heating and air-conditioning contractors; add benefits, which were 30.0% of private-industry compensation cost in June 2026, and spread it over billable hours.
- Refrigerant handling. The BLS notes that the EPA requires nearly all HVAC technicians to be certified in proper refrigerant handling; recovery time and certification costs belong in the job cost and in overhead.
- Permits, disposal and warranty labor you will not bill later.
- Overhead as a share of direct cost, from last year's books.
Licensing and certification costs for a new shop are covered in HVAC license and how to start an HVAC business.

Flat rate service pricing
Flat rate service means one fixed price per repair task, set before the work starts. It works for repeat tasks you have timed many times. Build each line from your average task time, parts cost, overhead and target margin, and price the diagnostic visit as its own line rather than giving it away.
- Diagnostic or service call fee: drive time and diagnosis at loaded labor cost, plus overhead and margin. State whether it is credited against the repair.
- Repair menu: one line per repeat task, priced from your own average times, not the fastest technician.
- Options: repair, replace and upgrade lines for the same problem let the customer choose.
- Peak season: the BLS notes that HVAC technicians may be on call for emergencies and sometimes work overtime or irregular schedules during peak heating and cooling seasons. Overtime raises the cost of those calls; price after-hours work as its own line.
What happens to a flat rate when a task overruns its book time is worked through in flat rate pricing for plumbers; the arithmetic is the same for HVAC.
Pricing maintenance agreements
ENERGY STAR recommends annual pre-season check-ups by a contractor, cooling in spring and heating in fall. A two-visit agreement is priced like any other job: visit time at loaded cost plus parts, overhead and margin, plus the cost of any discount or priority you promise. Example only: about $271 a year.
| Line | Calculation | Amount |
|---|---|---|
| Labor per visit | 1 hour x $55.87 loaded cost per billable hour | $55.87 |
| Materials per visit | Filter and consumables | $20.00 |
| Two visits | ($55.87 + $20.00) x 2 | $151.74 |
| Overhead | 25% of direct cost | $37.94 |
| Full cost | Direct + overhead | $189.68 |
| Price at 30% margin | $189.68 / 0.70 | $270.97 a year |
ENERGY STAR also notes that contractors get busy once summer and winter come, which is the reason to schedule agreement visits in spring and fall. Visits booked in shoulder months use technician hours that would otherwise go unbilled. If the agreement promises a repair discount, add its expected cost to the agreement price, or the discount comes out of your repair margin.
Lead fees and commissions charged on the price
A fee charged as a percentage of the price is not a cost you can mark up: it grows with the price. Divide instead: price = cost / (1 - target margin - fee %). Example only: an $8,000 job with a 30% target margin and a 10% fee on price needs $13,333.33, not $11,428.57.
At $11,428.57 the 10% fee would be $1,142.86 and profit would fall from $3,428.57 to $2,285.71, a 20% margin. At $13,333.33 the fee is $1,333.33 and profit stays at $4,000, 30% of the price. Flat per-lead fees, by contrast, belong in overhead or in the job cost.
In the Partner Program the fee applies only to closed jobs: 20% of the labor on service and repair jobs and 15% of the net on installations and replacements. Installation net: the invoice excluding sales tax, minus the documented cost of materials, equipment and permits. Details on the commission page; other lead sources are compared in HVAC leads.
Your prices are set. Now fill the schedule: partners get the calls from their area. One partner per trade per area. No setup fee, no monthly fee, no pay-per-lead. Made For Builders is not a contractor.
HVAC pricing FAQ
How much should I charge for HVAC work?
Your full job cost divided by one minus your target margin. No primary source publishes reliable HVAC prices, so build the cost from your own labor, equipment, parts and overhead, then test the price in the calculator on this page.
Should HVAC contractors price with markup or margin?
Either works if you know which one you are using, but targets are usually thought of as margin. A 30% markup gives only a 23.1% margin; a 30% margin needs a 42.9% markup.
How do you price an HVAC maintenance agreement?
Like a job: the visits it commits you to (ENERGY STAR recommends a cooling check in spring and a heating check in fall) at loaded labor cost, plus parts, overhead, margin and the cost of any discount you promise.
What is flat rate pricing in HVAC?
A fixed price per repair task, agreed before the work starts, built from your average task time, parts, overhead and margin. You carry the risk if the task runs long, so the task times must come from your own records.
Are HVAC prices going up in 2026?
This page does not track market prices, and we found no primary source publishing a reliable 2026 figure for HVAC job prices. What matters for your price list is your own cost: reprice whenever distributor prices or wages change.
Sources and method
Wage, benefit, schedule and certification information comes from the BLS and maintenance recommendations from ENERGY STAR, read on 10 November 2026. Job costs, prices and agreement figures on this page are illustrative examples with round hypothetical inputs, labelled as such. The hourly wage equivalent and loaded labor cost are our arithmetic.
Sources
- BLS Occupational Outlook Handbook: Heating, Air Conditioning, and Refrigeration Mechanics and Installers (pay, May 2025) (opens in a new tab)Accessed
- BLS Employer Costs for Employee Compensation, June 2026 (opens in a new tab)Accessed
- ENERGY STAR: Maintenance checklist (heating and cooling) (opens in a new tab)Accessed
Next steps
Where to go from here
Your trade
How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.
See your tradeRun your numbers
A free calculator to check the margin on a job before you price it.
Open the calculatorHow the Partner Program works
We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.
See the Partner ProgramApply to the Partner Program
Calls from your own area under a local brand. Commission only on closed jobs.
Apply
Last reviewed: