Skip to content
Unfinished basement with a gas furnace, water heater and sheet-metal supply duct running under the joists

Licensing

HVAC License (2026): What You Need to Run an HVAC Business, State by State

By· Founder, Made For BuildersReviewed

Summary

HVAC contractor licensing in five states

Texas, Florida, Georgia, Arizona and North Carolina all license the HVAC business at state level, through four different kinds of regulator. Experience requirements range from 2 years (4,000 hours) in North Carolina to 5 years for Georgia's unrestricted Class II license, according to each regulator's own pages, checked on November 9, 2026.

HVAC contractor licenses in our five launch markets (official sources, checked 2026-11-09)
StateRegulatorBusiness licenseExperience (official)Exam, fee, bondMore
TexasTexas Department of Licensing and Regulation (TDLR)Air Conditioning and Refrigeration (ACR) Contractor, Class A (any size unit) or Class B (cooling 25 tons and under, heating 1.5 million BTUs/hour and under)48 months under a licensed ACR contractor in the past 72 months, or 36 months plus 12 months as a certified technicianExam required; $115 application fee; license valid 1 yearTexas
FloridaConstruction Industry Licensing Board (CILB), within DBPRClass A Air-Conditioning Contractor (unlimited) or Class B (25 tons of cooling and 500,000 Btu of heating in any one system)At least 4 years, with at least 1 year as a foreman (s. 489.111), or a route combining a degree or college credits with experienceExam for certification; fee: check with DBPRFlorida
GeorgiaDivision of Conditioned Air Contractors, State Construction Industry Licensing BoardConditioned Air Contractor Class I (up to 175,000 BTU heating and 60,000 BTU cooling) or Class II (unrestricted)4 years for Class I, 5 years for Class II, including evidence of EPA certificationFee and exam details: check with the boardGeorgia
ArizonaRegistrar of Contractors (ROC)Contractor license in the ROC classification for the workQualifying party: 4 years' practical or management trade experience, 2 of them within the last 10 yearsWritten exam if required; surety bond or cash depositArizona
North CarolinaState Board of Examiners of Plumbing, Heating and Fire Sprinkler ContractorsHeating Group No. 1, 2 or 3 contractor license2 years (4,000 hours) of on-site full-time experienceExam within 90 days of the notification date; fee: check with the boardNorth Carolina
Only states we could check on the regulator's own website. Cities and counties may add requirements. Where a cell says "check with", the official page we read did not state that figure.

All 50 states

HVAC license requirements in all 50 states and DC

Of the 50 states and DC, 28 license HVAC contractors or the HVAC trade at state level and 10 do it only partially, through a dollar threshold, a general contractor license or some trades only. In 6, licensing is local or there is no state license. We could not verify 7 on an official page (checked November 17, 2026).

Our five launch markets are in bold: Texas, Florida, Georgia, Arizona and North Carolina. Their rules are summarized in the table above, and Florida has its own guide: Florida HVAC license. "Partial" means the state licenses only some HVAC work: jobs above a dollar threshold (Louisiana, Tennessee), a general contractor license that is not HVAC-specific (Montana, North Dakota), registration without a trade exam (Washington) or only some trades, such as refrigeration or fuel-burning equipment.

HVAC contractor licensing by state, with the issuing agency (official sources, checked 2026-11-17)
StateState-level HVAC licenseIssuing agencyOfficial page
AlabamaYesAlabama Board of Heating, Air Conditioning & Refrigeration Contractorshacr.alabama.gov
AlaskaCheck with your city or countyNot verified-
ArizonaYesRegistrar of Contractors (ROC)roc.az.gov
ArkansasYesDepartment of Labor and Licensing, HVAC/R sectionlabor.arkansas.gov
CaliforniaYesContractors State License Board (CSLB), C-20 classificationcslb.ca.gov
ColoradoLocal only (e.g. Denver)City and County of Denver, Community Planning and Developmentdenvergov.org
ConnecticutYesDepartment of Consumer Protection, Occupational Tradesportal.ct.gov
DelawareYesBoard of Plumbing, Heating, Ventilation, Air Conditioning and Refrigeration Examinersdpr.delaware.gov
District of ColumbiaYesDepartment of Licensing and Consumer Protection, Board of Industrial Tradesdlcp.dc.gov
FloridaYesConstruction Industry Licensing Board (CILB), DBPRmyfloridalicense.com
GeorgiaYesDivision of Conditioned Air Contractors, State Construction Industry Licensing Boardsos.ga.gov
HawaiiYesContractors License Board (DCCA), C-52 classificationcca.hawaii.gov
IdahoCheck with your city or countyNot verified-
IllinoisCheck with your city or countyNot verified-
IndianaLocal only (e.g. Indianapolis)City of Indianapolis, Department of Business and Neighborhood Servicesindy.gov
IowaYesDepartment of Inspections, Appeals, and Licensing, Plumbing & Mechanical Systemsdial.iowa.gov
KansasCheck with your city or countyNot verified-
KentuckyYesDepartment of Housing, Buildings and Construction, Division of HVACdhbc.ky.gov
LouisianaPartial: jobs over $10,000State Licensing Board for Contractors (LSLBC)lslbc.gov
MainePartial: fuel techniciansMaine Fuel Boardmaine.gov
MarylandYesBoard of Heating, Ventilation, Air Conditioning and Refrigeration Contractorslabor.maryland.gov
MassachusettsPartial: refrigerationBureau of Pipefitters, Refrigeration Technicians, and Sprinkler Fittersmass.gov
MichiganYesLARA, Bureau of Construction Codes (mechanical contractor)michigan.gov
MinnesotaNo state license (state bond)Department of Labor and Industry (mechanical contractor bond)dli.mn.gov
MississippiYesState Board of Contractors (MSBOC), HVAC classificationmsboc.us
MissouriLocal only (e.g. Kansas City)City of Kansas City, Missouribizcare.kcmo.gov
MontanaPartial: general contractor licenseDepartment of Labor & Industry, Construction Contractor Licenseboards.bsd.dli.mt.gov
NebraskaLocal only (e.g. Lincoln)City of Lincoln, Building and Safetylincoln.ne.gov
NevadaYesState Contractors Board (NSCB), C-21 classificationnvcontractorsboard.com
New HampshirePartial: mechanical licensing boardOffice of Professional Licensure and Certification, Mechanical Licensing Boardoplc.nh.gov
New JerseyYesState Board of Examiners of HVACR Contractorsnjconsumeraffairs.gov
New MexicoYesRegulation and Licensing Department, Construction Industries Division, Mechanical Bureaurld.nm.gov
New YorkCheck with your city or countyNot verified-
North CarolinaYesState Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractorsnclicensing.org
North DakotaPartial: general contractor license over $4,000Secretary of State, Contractor Licensingsos.nd.gov
OhioYesOhio Construction Industry Licensing Board (OCILB)com.ohio.gov
OklahomaYesConstruction Industries Board (mechanical trade license)oklahoma.gov
OregonPartial: HVAC/R specialty licensesDepartment of Consumer and Business Services, Building Codes Divisionapps.oregon.gov
PennsylvaniaCheck with your city or countyNot verified-
Rhode IslandYesDepartment of Labor and Training, professional regulationdlt.ri.gov
South CarolinaYesDepartment of Labor, Licensing and Regulation, Contractor's Licensing Boardllr.sc.gov
South DakotaLocal only (e.g. Sioux Falls)City of Sioux Fallssiouxfalls.gov
TennesseePartial: projects of $25,000 or moreBoard for Licensing Contractors (CMC mechanical classifications)tn.gov
TexasYesTexas Department of Licensing and Regulation (TDLR)tdlr.texas.gov
UtahYesDivision of Professional Licensing (DOPL), S350 HVAC classificationdopl.utah.gov
VermontPartial: trade licensesDepartment of Public Safety, Division of Fire Safetyfiresafety.vermont.gov
VirginiaYesDepartment of Professional and Occupational Regulation (DPOR), Board for Contractorsdpor.virginia.gov
WashingtonPartial: contractor registrationDepartment of Labor & Industries (L&I)lni.wa.gov
West VirginiaYesDivision of Labor, Licensing Sectionlabor.wv.gov
WisconsinYesDepartment of Safety and Professional Services (DSPS)dsps.wi.gov
WyomingCheck with your city or countyNot verified-
Checked on November 17, 2026 against each agency's own page, except Nevada, Rhode Island and Utah, where we read the official rule through Cornell LII's copy, and South Carolina, where we read the state code. "Local only" rows cite one city as an example; other cities set their own rules. Seven rows say "Check with your city or county" because we could not read an official page for them on that date (Alaska, Idaho, Illinois, Kansas, New York, Pennsylvania, Wyoming), so we make no claim about them. Even where the state licenses HVAC work, cities and counties may add their own requirements.

Federal vs state

Do you need a license to run an HVAC business?

Usually two things. The EPA's Section 608 certification is federal and personal: it applies to each technician who handles refrigerants. The contractor license is issued by the state to the business, or to the person who qualifies it. Owning an HVAC company means you need both covered before you take paid work.

EPA Section 608 (federal, per technician). EPA rules under the Clean Air Act say that technicians who maintain, service, repair, or dispose of equipment that could release refrigerants into the atmosphere must be certified. Technicians earn it by passing an EPA-approved test, given by an EPA-approved certifying organization. The EPA lists four types: Type I for small appliances, Type II for high- and very high-pressure appliances, Type III for low-pressure appliances, and Universal for all types of equipment. According to the EPA, the credentials do not expire, and the EPA does not issue certification cards itself.

State contractor license (per business). Section 608 does not let you contract for HVAC work. That permission comes from the state. In Texas, TDLR says that contractors who install, repair, or maintain air conditioning, refrigeration or heating systems must have a TDLR license, and that ACR companies must employ an ACR contractor in each permanent location. Florida law says a person must be certified or registered to engage in the business of contracting. Arizona law makes it unlawful to act or offer to act as a contractor without a license in good standing.

Your technicians

The EPA exempts apprentices from certification provided they are closely and continually supervised by a certified technician. Some states also register technicians: in Texas, anyone doing non-exempt ACR maintenance must at least be registered as an ACR Technician (no exam, $20 fee, according to TDLR's FAQ).

Steps

Steps to get an HVAC business licensed

The order is similar in every state we checked: document the experience the regulator asks for, apply, pass the state exam, then show insurance or a bond before the license is issued. Business registration runs in parallel. In Texas, TDLR gives you one year from the application date to finish every step, including the exam.

  1. Experience and exam

    Collect proof of supervised experience in the form the regulator wants. TDLR asks for 48 months under a licensed ACR contractor in the past 72 months; Georgia asks for 4 years for Class I and 5 for Class II; North Carolina asks for 2 years (4,000 hours). Then sit the state exam. In Texas, all requirements, including passing the exam, must be completed within one year of filing the application.

  2. Insurance and bond

    TDLR requires ACR contractors to keep commercial general liability insurance at all times while the license is active, with minimums that depend on Class A or B. In Florida, a local government may deny permits to a contractor who does not provide proof of public liability and property damage insurance. Arizona requires a surety bond or cash deposit before it grants an original contractor's license.

  3. Business registration

    The SBA says you need to choose a business structure before you register your business with the state. The IRS issues an Employer Identification Number (EIN) online, in minutes and for free. Our guide on how to start a plumbing business walks through these steps; they are the same for an HVAC company.

State by state

HVAC licensing state by state

Each state below links to the regulator and to our market page, where we summarize plumbing, electrical and HVAC rules together. Read the class limits carefully: in Texas, Florida and Georgia, the lower class caps system size in tons or BTU, which decides whether you can bid on light commercial work.

  • Texas (TDLR): Class A covers any size unit; Class B covers cooling systems of 25 tons and under and heating systems of 1.5 million BTUs/hour and under. A technician certification held for 12 months shortens the experience route to 36 months. Application fee $115; licenses are valid for 1 year. Texas licensing summary.
  • Florida (CILB): a Class A air-conditioning contractor's services are unlimited; Class B is limited to 25 tons of cooling and 500,000 Btu of heating in any one system. Class C is limited to servicing and only for certifications or registrations valid on October 1, 1988, so it is not a route for new applicants. A certified contractor may contract in any jurisdiction in the state. Florida licensing summary.
  • Georgia (Division of Conditioned Air Contractors): Class I is restricted to systems not exceeding 175,000 BTU of heating and 60,000 BTU of cooling; Class II is unrestricted. The board's rule asks for evidence of EPA certification as part of the documented experience. Georgia licensing summary.
  • Arizona (ROC): the license is issued in a trade classification. The qualifying party needs 4 years' practical or management trade experience, 2 of them in the last 10 years, and the business needs a bond or cash deposit. ROC's classification pages could not be read on November 9, 2026, so confirm the right HVAC classification with ROC. Arizona licensing summary.
  • North Carolina (Plumbing, Heating and Fire Sprinkler board): HVAC contractors are licensed by Heating Group No. 1, 2 or 3. The exam requires 2 years (4,000 hours) of on-site full-time experience and must be taken within 90 days of the notification date. North Carolina licensing summary.

Reciprocity

Moving an HVAC license between states

Do not assume a license travels. North Carolina's board states plainly that there are no license reciprocity agreements with any other state, so applicants must meet its requirements and pass its exams. Your EPA Section 608 certification is federal, so it stays valid wherever you work.

If you plan to work across a state line, read the regulator's page for out-of-state applicants before you quote a job there. The markets overview links to every state we cover.

First jobs

After the license: getting your first HVAC jobs

A license makes you legal, not busy. New HVAC businesses usually combine their own Google Business Profile and website, paid lead platforms and referral work. Price each job so the margin covers the time you spend chasing it, and track what each channel costs you per closed job, not per lead.

Licensed and ready for work?

Through the Partner Program, we build a local brand for your area and pass its calls to you. The commission is 20% of the labor on service and repair jobs, and 15% of the net on installations and replacements, with no setup fee and no monthly minimum: how commission works. We check your license before your brand goes live. Made For Builders is not a contractor: you do the work under your own license and insurance.

FAQ

HVAC license questions

How long does it take to get an HVAC license?

For a contractor license, years rather than months. TDLR asks for 48 months of supervised experience in the past 72 months, Georgia asks for 4 years for Class I and 5 for Class II, and North Carolina asks for 2 years (4,000 hours), according to each regulator on November 9, 2026.

Which HVAC license is best?

The one that covers the systems you plan to sell. In Texas, Class A covers any size unit while Class B stops at 25 tons of cooling; in Georgia, Class II is unrestricted while Class I stops at 175,000 BTU of heating and 60,000 BTU of cooling. Residential-only businesses often fit within the lower class.

How hard is it to be HVAC certified?

EPA Section 608 certification requires passing an EPA-approved test given by an EPA-approved certifying organization, and the credential does not expire. The state contractor exam is a separate test with its own eligibility rules, set by the regulator.

How fast can you become an HVAC technician?

It depends on the state. In Texas, TDLR's FAQ says registering as an ACR Technician requires no exam, a one-page application and a $20 fee. Running the business is a different step: the contractor license needs years of documented experience.

Can HVAC make $100,000 a year?

The BLS reports a median annual wage of $61,010 for HVAC mechanics and installers in May 2025, with the highest 10 percent earning more than $95,210. Those are employee wages. No official source publishes what HVAC business owners earn.

Sources

Sources

Sources

  1. US EPA: Section 608 Technician Certification Requirements (opens in a new tab)Accessed
  2. US EPA: Section 608 Technician Certification (opens in a new tab)Accessed
  3. TDLR: Air Conditioning and Refrigeration Contractors (opens in a new tab)Accessed
  4. TDLR: Apply for an ACR Contractor License (opens in a new tab)Accessed
  5. TDLR: Air Conditioning and Refrigeration FAQ (opens in a new tab)Accessed
  6. Florida Statutes s. 489.105 (definitions) (opens in a new tab)Accessed
  7. Florida Statutes s. 489.107 (Construction Industry Licensing Board) (opens in a new tab)Accessed
  8. Florida Statutes s. 489.111 (licensure by examination) (opens in a new tab)Accessed
  9. Florida Statutes s. 489.113 (qualifications for practice) (opens in a new tab)Accessed
  10. Georgia Secretary of State: About the Board of Conditioned Air Contractors (opens in a new tab)Accessed
  11. Ga. Comp. R. & Regs. r. 121-3-.04 (secondary source: Cornell LII copy of the official rule) (opens in a new tab)Accessed
  12. Arizona Revised Statutes s. 32-1151 (opens in a new tab)Accessed
  13. Arizona Revised Statutes s. 32-1122 (opens in a new tab)Accessed
  14. Arizona Revised Statutes s. 32-1152 (bonds) (opens in a new tab)Accessed
  15. NC Plumbing, Heating and Fire Sprinkler board: Applicant Information (opens in a new tab)Accessed
  16. Alabama: the state Board of Heating, Air Conditioning & Refrigeration Contractors licenses HVAC contractors (opens in a new tab)Accessed
  17. Arkansas: HVAC/R contractor exam run by the Department of Labor and Licensing (opens in a new tab)Accessed
  18. California: CSLB C-20 HVAC contractor classification (opens in a new tab)Accessed
  19. Colorado: HVAC certificates issued locally, e.g. Denver's Heating and Ventilating supervisor certificates (opens in a new tab)Accessed
  20. Connecticut: DCP heating, piping and cooling contractor licenses (opens in a new tab)Accessed
  21. Delaware: the board issues master HVACR licenses (opens in a new tab)Accessed
  22. District of Columbia: Board of Industrial Trades issues the Refrigeration & Air Conditioning Mechanic license (opens in a new tab)Accessed
  23. Hawaii: C-52 ventilating and air conditioning contractor classification (opens in a new tab)Accessed
  24. Indiana: no state HVAC contractor license; licensing is local (opens in a new tab)Accessed
  25. Iowa: state plumbing and mechanical systems licensing covers HVAC (opens in a new tab)Accessed
  26. Kentucky: HVAC contractors licensed by the Division of HVAC since 1995 (opens in a new tab)Accessed
  27. Louisiana: HVAC subclassification license required when the value exceeds $10,000 (opens in a new tab)Accessed
  28. Maine: the Fuel Board regulates propane, natural gas, oil and solid fuel burner technicians (opens in a new tab)Accessed
  29. Maryland: the HVACR board licenses individuals who provide HVACR services (opens in a new tab)Accessed
  30. Massachusetts: state refrigeration contractor license (opens in a new tab)Accessed
  31. Michigan: state mechanical contractor license (opens in a new tab)Accessed
  32. Minnesota: no state license for mechanical contractors; $25,000 bond with DLI (opens in a new tab)Accessed
  33. Mississippi: MSBOC HVAC classification, test required (opens in a new tab)Accessed
  34. Missouri: HVAC certification issued locally, e.g. Kansas City (opens in a new tab)Accessed
  35. Montana: general construction contractor license, not HVAC-specific (opens in a new tab)Accessed
  36. Nebraska: mechanical licenses issued locally, e.g. Lincoln (opens in a new tab)Accessed
  37. Nevada: C-21 refrigeration and air-conditioning license (NAC 624.380, secondary source: Cornell LII copy of the official rule) (opens in a new tab)Accessed
  38. New Hampshire: Mechanical Licensing Board credentials include oil heating technician certification (opens in a new tab)Accessed
  39. New Jersey: state HVACR contractor board (opens in a new tab)Accessed
  40. New Mexico: Mechanical Bureau enforces state licensing (opens in a new tab)Accessed
  41. North Dakota: general contractor license for jobs over $4,000 (opens in a new tab)Accessed
  42. Ohio: OCILB licenses HVAC contractors (opens in a new tab)Accessed
  43. Oklahoma: CIB issues mechanical trade licenses (opens in a new tab)Accessed
  44. Oregon: Building Codes Division HVAC/R limited maintenance specialty contractor license (opens in a new tab)Accessed
  45. Rhode Island: DLT rules for pipefitters, refrigeration technicians and oil heat contractors (260-RICR-30-15-2, secondary source: Cornell LII copy of the official rule) (opens in a new tab)Accessed
  46. South Carolina: mechanical contractor licenses with air conditioning and heating subclassifications (S.C. Code 40-11) (opens in a new tab)Accessed
  47. South Dakota: mechanical licenses issued locally, e.g. Sioux Falls (opens in a new tab)Accessed
  48. Tennessee: contractor license required for projects of $25,000 or more (opens in a new tab)Accessed
  49. Tennessee: mechanical CMC classifications and exams (opens in a new tab)Accessed
  50. Utah: S350 HVAC Contractor classification (R156-55a-301, secondary source: Cornell LII copy of the official rule) (opens in a new tab)Accessed
  51. Vermont: Division of Fire Safety trade license C3 Refrigeration and Air Conditioning (opens in a new tab)Accessed
  52. Virginia: Board for Contractors regulates HVAC tradesmen (opens in a new tab)Accessed
  53. Washington: HVAC is a registered contractor specialty with L&I (opens in a new tab)Accessed
  54. West Virginia: Division of Labor issues contractor licenses and HVAC technician certifications (opens in a new tab)Accessed
  55. Wisconsin: DSPS HVAC Contractor credential (opens in a new tab)Accessed
  56. SBA: Launch your business (opens in a new tab)Accessed
  57. IRS: Get an Employer Identification Number (opens in a new tab)Accessed
  58. BLS Occupational Outlook Handbook: Heating, Air Conditioning, and Refrigeration Mechanics and Installers (opens in a new tab)Accessed

Next steps

Where to go from here

  • Your trade

    How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.

    See your trade
  • Run your numbers

    A free calculator to check the margin on a job before you price it.

    Open the calculator
  • Licensing

    What you need to run a trade business legally, from official sources.

    All licensing guides
  • How the Partner Program works

    We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.

    See the Partner Program
  • Apply to the Partner Program

    Calls from your own area under a local brand. Commission only on closed jobs.

    Apply

Last reviewed: