Skip to content
Electrician in a gray long-sleeve shirt drives a screw into an open breaker panel with a yellow cordless drill

Licensing

Electrical Contractors License (2026): Requirements State by State

By· Founder, Made For BuildersReviewed

Summary

Electrical contractor licensing in six states

In all six states below, the business needs its own contractor license, and that license rests on one qualifying person: a Master Electrician of record in Texas, a qualifying agent in Florida, a qualifier in California and Arizona, and a listed qualified individual in North Carolina. Experience, exam and bond rules differ by state.

License to run an electrical contracting business (official sources, checked 2026-11-10)
StateRegulatorBusiness licenseExperience (official)Exam, fees, insurance or bondMore
TexasTexas Department of Licensing and Regulation (TDLR)Electrical Contractor, which must employ a Master Electrician of recordMaster Electrician: Journeyman license held at least 2 years and 12,000 hours of on-the-job training$110 contractor application fee; liability insurance of $300,000 per occurrence and $600,000 aggregate; annual renewalTexas
FloridaElectrical Contractors' Licensing Board, within DBPRCertified (statewide) or registered (local) electrical contractorOne route: at least 4 years as a supervisor or contractor within the last 8 years (s. 489.511)Certification exam; public liability and property damage insurance before the first certificate; fee: check with DBPRFlorida
GeorgiaDivision of Electrical Contractors, State Construction Industry Licensing BoardElectrical Contractor Class I (single-phase, up to 200 amperes) or Class II (unrestricted)At least 4 years of Primary experienceMinimum exam score of 70; applicant at least 21; fee: check with the boardGeorgia
ArizonaRegistrar of Contractors (ROC)Contractor license in an ROC electrical classificationQualifying party: 4 years' practical or management trade experience, 2 of them in the last 10 yearsSurety bond or cash deposit before the original license; fee: check with ROCArizona
North CarolinaState Board of Examiners of Electrical Contractors (NCBEEC)Limited (projects up to $60,000), Intermediate (up to $150,000) or UnlimitedVaries by classification (board rules, Section .0200)$125 exam fee; license $100, $150 or $200 a year; bonding ability statement for Intermediate and UnlimitedNorth Carolina
CaliforniaContractors State License Board (CSLB)C-10 Electrical ContractorQualifier: 4 full years at journey level or above within the last 10 years$450 application fee; $25,000 contractor's bond; employees need DIR certificationCalifornia guide
Only states whose regulator or statute we could read on November 10, 2026. Cities and counties may add their own registration. Where a cell says "check with", the official page we read did not state that figure.

Requirements change

Fees, experience rules and insurance minimums are set by each board and can change between our checks. Confirm every requirement with the board before you apply or quote work.

Business vs personal

Do you need a license to run an electrical business?

Yes, in every state on this page. The BLS notes that most states require electricians to be licensed, and running the company is a separate license on top of the personal one. The contractor license is what lets the business sign contracts, advertise electrical work and pull permits in its own name.

Texas puts it in one sentence: anyone who performs, or offers to perform, non-exempt electrical work must be licensed and perform that work through a licensed electrical contractor. So even a licensed Master Electrician working for his own customers needs the business license. TDLR says the Master Electrician of record may also be the business owner.

Florida law says a person may not practice contracting unless certified or registered, and a certificate issued to a company is issued in the name of its qualifying agent. In California, a contractor license is needed when a project requires a building permit, uses additional workers or totals $1,000 or more in labor and materials. Arizona makes it unlawful to act or offer to act as a contractor without a license in good standing.

Unlicensed contracting is a crime, not a paperwork issue

In Florida, unlicensed electrical contracting is a first-degree misdemeanor (s. 489.531). In California, a first offense is usually a misdemeanor with up to six months in jail and/or a $500 fine, plus a possible administrative fine of $200 to $15,000 (CSLB).

Steps

Steps to get an electrical contractor license

The order is the same almost everywhere: build documented experience, pass the exam, put insurance or a bond in place, then register the business. What changes is who must hold the experience. In most states it can be you or a qualifying employee, but that person's license is what the company works under.

  1. Experience and exam

    Expect about four years at journey level or above: Georgia asks for 4 years of Primary experience, Arizona and California 4 years for the qualifier, and Florida 4 years as a supervisor or contractor on one of its routes. Texas counts hours instead: 12,000 hours of on-the-job training and a Journeyman license held two years before the Master application ($45). Texas exams are open book with the 2026 National Electrical Code; North Carolina's contractor exams have 100 questions, 6 hours and a pass mark of 70.

  2. Insurance and bond

    Texas electrical contractors must keep $300,000 per occurrence, $600,000 aggregate and $300,000 for products and completed operations, and show workers' compensation coverage or file a statement of non-coverage. California requires a $25,000 contractor's bond, Arizona a surety bond or cash deposit, Florida proof of public liability and property damage insurance, and North Carolina a statement of bonding ability for Intermediate and Unlimited licenses.

  3. Business registration

    The SBA says to choose a business structure before you register your business with the state, and the IRS issues an EIN online, in minutes and for free. California licenses can be issued to individuals, partnerships, corporations, LLCs or joint ventures. For pricing your first jobs, see the electrical pricing guide.

Contractor in a safety vest writing on a clipboard laid over construction plans

State by state

Electrical contractor licensing state by state

Each state below links to our market page or to a dedicated state guide. For an owner, the detail that matters most is the license ceiling: some classes limit the size or type of job you can sell, so the class you apply for should match the work you want, not just the exam you can pass first.

  • Texas (TDLR): the Electrical Contractor license costs $110 to apply for and, like all TDLR electrician licenses, renews every year. A Master Electrician can be assigned to only one contractor unless he owns more than 50 percent of it. Texas licensing summary.
  • Florida (ECLB): a certified contractor holds a statewide certificate of competency; a registered contractor may contract only in the jurisdiction where the registration was issued. More in the Florida market page.
  • Georgia (Division of Electrical Contractors): Class I is limited to single-phase installations that do not exceed 200 amperes at the service drop or service lateral; Class II is unrestricted. Georgia licensing summary.
  • Arizona (ROC): the qualifying party needs 4 years' trade experience and the business posts a bond or cash deposit. ROC's classification pages could not be read on November 10, 2026, so confirm the electrical classification with ROC. Arizona licensing summary.
  • North Carolina (NCBEEC): the license class caps the value of a single project: $60,000 for Limited, $150,000 for Intermediate, no cap for Unlimited. Licenses expire one year after issuance. North Carolina licensing summary.
  • California (CSLB and DIR): the business holds a C-10 license; electricians it employs need state certification from DIR. See electrical license in California.
  • New Jersey: licensed by the Board of Examiners of Electrical Contractors in the Division of Consumer Affairs. More in the NJ electrical contractors license guide.

Moving across a state line? Texas lists reciprocal Master Electrician agreements with several states, including North Carolina for master electricians or unlimited electrical contractors, and North Carolina's board has formal reciprocal agreements with contractor boards of several states. Florida certifies by endorsement applicants who have held another state's license for at least 10 years, among other routes. The markets overview lists every state we cover.

First jobs

After the license: getting your first electrical jobs

With the license in hand, the work is filling the schedule at a price that leaves a margin. Most new electrical contractors start with their own Google Business Profile and website, add one or two lead sources, and judge each source by cost per closed job rather than cost per lead.

Licensed and ready for work?

Through the Partner Program, we build and run a local brand for your trade and ZIP codes. You answer the calls and do the work. The commission is 20% of the labor on service and repair jobs, and 15% of the net on installations and replacements, with no setup fee and no monthly fee: how commission works. You do the work under your own license and insurance. We are not a contractor.

FAQ

Electrical contractors license questions

Who is an electrical contractor?

A business licensed to sell and carry out electrical work, not just a person licensed to do it. TDLR defines electrical contractors as licensed to engage in the business of designing, installing, erecting, repairing, or altering electrical wires or conductors. The contractor license rests on a qualifying person, such as a Master Electrician of record in Texas.

What is the lowest level of electrician?

The entry level is an apprentice or trainee who works under supervision. Texas lists an Apprentice Electrician license, and California registers electrician trainees, who may work only under constant supervision of a certified electrician. Neither can run an electrical contracting business.

How do I get a C-10 license in California?

The qualifier needs at least four full years at journey level or above within the last 10 years, then applies to the CSLB with a $450 application fee and takes the exams. A $25,000 contractor's bond must be in place before the license is issued. The full path is in our California electrical license guide.

Can you make $100,000 a year as an electrician?

Some do. The BLS reports a median annual wage of $63,190 for electricians in May 2025, and the highest 10 percent earned more than $108,510. Those are employee wages; no official source publishes what electrical contracting owners earn.

Is an electrical contractor license valid in other states?

Not automatically. Some states sign reciprocity agreements: Texas recognizes North Carolina master electricians and unlimited electrical contractors for its Master Electrician license. Check each board's rules before you quote work across a state line.

Sources

Sources

Sources

  1. TDLR: Electricians (opens in a new tab)Accessed
  2. TDLR: Apply for a New Electrical Contractor License (opens in a new tab)Accessed
  3. TDLR: Apply for a New Master Electrician License (opens in a new tab)Accessed
  4. TDLR: Electrician Exam Information (opens in a new tab)Accessed
  5. TDLR: Transfer Your Out-of-State Electrician License (opens in a new tab)Accessed
  6. Florida Statutes s. 489.505 (definitions) (opens in a new tab)Accessed
  7. Florida Statutes s. 489.507 (Electrical Contractors' Licensing Board) (opens in a new tab)Accessed
  8. Florida Statutes s. 489.511 (certification) (opens in a new tab)Accessed
  9. Florida Statutes s. 489.521 (business organizations, qualifying agents) (opens in a new tab)Accessed
  10. Florida Statutes s. 489.531 (prohibitions, penalties) (opens in a new tab)Accessed
  11. Georgia Rules, Chapter 121-3 (Rule 121-3-.01) (opens in a new tab)Accessed
  12. Arizona Revised Statutes s. 32-1151 (opens in a new tab)Accessed
  13. Arizona Revised Statutes s. 32-1122 (opens in a new tab)Accessed
  14. Arizona Revised Statutes s. 32-1152 (bonds) (opens in a new tab)Accessed
  15. NCBEEC: Licensing (opens in a new tab)Accessed
  16. NCBEEC: Examinations (opens in a new tab)Accessed
  17. NCBEEC: FAQ (opens in a new tab)Accessed
  18. NCBEEC: Reciprocity (opens in a new tab)Accessed
  19. CSLB: C-10 Electrical Contractor (opens in a new tab)Accessed
  20. CSLB: Before Applying for the Examination (opens in a new tab)Accessed
  21. CSLB: Applying for the Examination (opens in a new tab)Accessed
  22. CSLB: Examination Study Guides (opens in a new tab)Accessed
  23. California DIR: Electrician Certification Program (opens in a new tab)Accessed
  24. California DIR: Electrician Certification FAQ (opens in a new tab)Accessed
  25. BLS Occupational Outlook Handbook: Electricians (opens in a new tab)Accessed
  26. SBA: Launch your business (opens in a new tab)Accessed
  27. IRS: Get an Employer Identification Number (opens in a new tab)Accessed

Next steps

Where to go from here

  • Your trade

    How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.

    See your trade
  • Run your numbers

    A free calculator to check the margin on a job before you price it.

    Open the calculator
  • Licensing

    What you need to run a trade business legally, from official sources.

    All licensing guides
  • How the Partner Program works

    We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.

    See the Partner Program
  • Apply to the Partner Program

    Calls from your own area under a local brand. Commission only on closed jobs.

    Apply

Last reviewed: