
Licensing
Electrical License in California (2026): C-10 Contractor License and Electrician Certification
In California, an electrical business needs a C-10 Electrical contractor license from the CSLB, with a qualifier who has 4 years of journey-level experience in the last 10 years and a $25,000 bond. The electricians it employs need DIR certification, which for a General Electrician requires 8,000 hours (official sources, checked November 10, 2026).
Summary of official sources for orientation, not legal advice. The CSLB and DIR always have the final word.
ByEdu López Parada· Founder, Made For BuildersReviewed
Summary
California electrical licensing at a glance
California uses two agencies. The Contractors State License Board (CSLB) licenses the business as a C-10 Electrical Contractor. The Department of Industrial Relations (DIR), through the Labor Commissioner's Office, certifies the electricians who work for C-10 contractors. As the owner you need the first; your employees need the second.
| C-10 contractor license (the business) | Electrician certification (your employees) | |
|---|---|---|
| Issued by | Contractors State License Board (CSLB) | DIR, Division of Labor Standards Enforcement |
| Who needs it | Anyone contracting work that needs a building permit, uses additional workers or totals $1,000 or more | Electricians who work for a contractor with a class C-10 license |
| Experience | Qualifier: at least 4 full years at journey level, foreman, supervisor or contractor within the last 10 years | General Electrician: 8,000 hours; Residential Electrician: 4,800 hours |
| Exam | Trade and/or law examination, plus the asbestos open-book exam | Exam in one of five classifications |
| Fees | $450 application; initial license $200 (sole owner) or $350 (non-sole owner) | $175 ($100 exam and $75 administration); renewal $100 |
| Bond | $25,000 contractor's bond; qualifier bond in some cases | None stated |
| Renewal | Active timely renewal for a C-10 sole owner: $470 | Certification renewal: $100 |
Requirements change
CSLB and DIR set these fees and rules and can change them between our checks. Confirm every requirement with the CSLB and DIR before you apply, hire or quote.
Business vs personal
Do you need a license to run an electrical business in California?
Yes, in almost every real case. The CSLB requires a contractor license whenever a project needs a building permit, uses any additional workers, or totals $1,000 or more in labor and materials. If your company uses employees on the job, the $1,000 exemption does not apply.
The C-10 classification covers a contractor who places, installs, erects or connects any electrical wires, fixtures, appliances, apparatus, raceways, conduits, solar photovoltaic cells or any part thereof. A license may be issued to an individual, a partnership, a corporation, an LLC or a joint venture.
On the employee side, existing law requires that persons performing work as electrician under a C-10 licensed contractor be certified. DIR is explicit for owners: if you are a licensed C-10 contractor you do not need to be certified, but if you have employees that work under you, they need to get certified.
Penalties for contracting without a license
According to the CSLB, a first offense is usually a misdemeanor with a potential sentence of up to six months in jail and/or a $500 fine, along with a potential administrative fine of $200 to $15,000.
Steps
Steps to get a C-10 electrical contractor license
The CSLB path runs from experience to application, exam, bond and license fee. The qualifier documents four years of experience, the business applies for one classification with a $450 fee, the qualifier passes the exams, and only then are the $25,000 bond and the initial license fee filed.
Experience
The qualifier must have, within the ten years before the application, at least four full years of experience at journey level, or as a foreman, supervisor or contractor in the C-10 classification. The experience must be verifiable and certified by people who know it.
Application and exam
You may apply for only one license classification at a time if you must take the exam. Submit the application with the $450 application processing fee. The CSLB publishes study guides for the trade and Law & Business exams, and every new applicant completes the asbestos open-book exam.
Bond and license fee
You need a $25,000 bond in place before you become licensed. A Bond of Qualifying Individual is required if the license is qualified by a Responsible Managing Employee (RME); an officer who owns 10% or more of the voting stock files an exemption instead. The initial license fee is $200 for a sole owner and $350 for other entities.
Business registration
The SBA says to choose a business structure before you register your business with the state, and the IRS issues an EIN online, in minutes and for free.

The qualifier
Being the qualifier, or hiring one
The qualifier is the person on the CSLB records who meets the experience and exam requirements, and is responsible for the company's construction operations. If you do not have the experience yourself, you can hire a Responsible Managing Employee, but the license then depends on that person staying.
- Owner as qualifier: with an individual license you may be the qualifier yourself; a corporation uses one of its listed officers as Responsible Managing Officer (RMO), and an LLC one of its listed officers, members or managers.
- Hired qualifier (RME): must be actively involved in the business at least 32 hours per week or 80 percent of its operating hours, whichever is less.
- Limits: a person may serve as the qualifying individual for no more than three firms in any one-year period.
- Working with the tools: only the qualifying person may perform electrical work under the license without a state electrician certificate. Partners and officers who did not sit for the exam need certification.
Your crew
Electrician certification for the people you hire
Every electrician who works for your C-10 company needs DIR certification, including a foreman who sometimes uses the tools. There are five classifications, from General Electrician at 8,000 hours to Residential Electrician at 4,800 hours. Workers without enough hours register as trainees and work only under constant supervision of a certified electrician.
- Classifications: General Electrician; Residential Electrician; Fire/Life Safety Technician; Voice, Data, Video Technician; and Non-residential Lighting Technician.
- Hours: 8,000 hours for General and 4,800 hours for Residential, worked for an electrical contractor on systems covered by the National Electrical Code.
- Fees: $175 to apply and test ($100 exam fee and $75 administration fee), $100 to renew, and $25 to register as an electrician trainee.
- Hiring from out of state: out-of-state electricians need to be certified before they start working in California, with no grace period. A license from another state makes them eligible to sit for the test.
For the general picture of what the business needs versus what each electrician needs in other states, see electrical license: business vs crew.
Moving to California
Licensed in another state?
The CSLB says out-of-state individuals can apply for a California license if they meet the qualifications, and that several states have reciprocity agreements with California. Your electricians still need DIR certification: another state's license only makes them eligible to sit for the certification test.
Compare the rules in the states we cover in the electrical contractors license guide, including Texas, Florida, Georgia, Arizona and North Carolina.
First jobs
After the license: getting your first electrical jobs
With the C-10 in hand, the work is filling the calendar at a margin. Start with your own Google Business Profile and website, add one or two lead sources, and measure each by cost per closed job rather than cost per lead.
- Set up your own channels with marketing for electricians.
- Price your work with the electrical pricing guide and the commercial electrical pricing guide.
- Check margins with the job profit margin calculator.
- Read what we look for in electrical partners on the electricians page, and see the launch areas on Markets.
Licensed and ready for work?
Through the Partner Program, we build and run a local brand for your trade and ZIP codes. You answer the calls and do the work. The commission is 20% of the labor on service and repair jobs, and 15% of the net on installations and replacements, with no setup fee and no monthly fee: how commission works. You do the work under your own license and insurance. We are not a contractor.
FAQ
California electrical license questions
How do I become a licensed electrician in California?
To work for an electrical contractor, you get DIR certification: 8,000 hours for General Electrician or 4,800 for Residential, then the exam. To run your own electrical business, you need a CSLB C-10 license, which requires four full years at journey level or above within the last 10 years.
Do you need an electrical license in California?
A business contracting electrical work needs a C-10 license whenever the job needs a building permit, uses additional workers or totals $1,000 or more. Electricians working for a C-10 contractor need DIR certification; the licensed C-10 owner does not.
How long does it take to get an electrical license in California?
The experience is the long part: 8,000 hours for General Electrician certification, and four full years for a C-10 qualifier. Neither the CSLB nor DIR pages we read state a processing time; CSLB publishes its current processing times separately.
Can you make $100,000 a year as an electrician?
Some do. The BLS reports a national median annual wage of $63,190 for electricians in May 2025, and the highest 10 percent earned more than $108,510. Those are employee wages; no official source publishes what California electrical contractors earn.
Sources
Sources
Sources
- CSLB: C-10 Electrical Contractor (opens in a new tab)Accessed
- CSLB: Before Applying for the Examination (opens in a new tab)Accessed
- CSLB: Applying for the Examination (opens in a new tab)Accessed
- CSLB: Bond Requirements (opens in a new tab)Accessed
- CSLB: List of All CSLB Fees (opens in a new tab)Accessed
- CSLB: Examination Study Guides (opens in a new tab)Accessed
- California DIR: Electrician Certification Program (opens in a new tab)Accessed
- California DIR: Who needs to be certified (opens in a new tab)Accessed
- California DIR: Electrician Certification FAQ (opens in a new tab)Accessed
- California DIR: Electrician Certification Program fees (opens in a new tab)Accessed
- California DIR: General electrician (opens in a new tab)Accessed
- California DIR: Residential electrician (opens in a new tab)Accessed
- BLS Occupational Outlook Handbook: Electricians (opens in a new tab)Accessed
- SBA: Launch your business (opens in a new tab)Accessed
- IRS: Get an Employer Identification Number (opens in a new tab)Accessed
Next steps
Where to go from here
Your trade
How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.
See your tradeRun your numbers
A free calculator to check the margin on a job before you price it.
Open the calculatorHow the Partner Program works
We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.
See the Partner ProgramApply to the Partner Program
Calls from your own area under a local brand. Commission only on closed jobs.
Apply
Last reviewed: