Skip to content
Electrician in insulated gloves testing a control panel with a digital multimeter

Licensing

Masters License Electrical (2026): Master Electrician License Requirements by State

By· Founder, Made For BuildersReviewed

Summary

Master electrician license requirements by state

A master electrician license is a personal license for planning and supervising electrical work, and in several states the electrical contracting business rests on one. Where it exists, it sits above the journeyman license and requires journeyman experience plus an exam. In four of our five markets, the state sources we read license the contracting business instead.

Master electrician or equivalent state license (official sources, checked 2026-11-10)
StateRegulatorState licenseExperience to qualifyExamFees and continuing education
TexasTDLRMaster ElectricianJourneyman license held at least two years and 12,000 hours of on-the-job training under a Texas MasterPSI, open book$45 to apply, $45 to renew each year; 4 hours of CE before each renewal
IowaElectrical Examining Board (DIAL)Master Electrician, Class AAt least one year as a licensed journeyman electricianScore of 70 or higher$375 for 3 years; 18 contact hours of CE per 3-year period
MontanaState Electrical BoardMaster ElectricianFour years of licensed journeyman experiencePSI, open book, 75% or higherSixteen hours of NEC education per renewal
MarylandState Board of ElectriciansMaster electricianAt least seven years under a Maryland licensed master electrician (up to three years of credit for formal study)Yes, application through PSISee the board's fee page
North CarolinaNCBEECElectrical contractor license held by a qualified individual (Limited, Intermediate, Unlimited)Varies by classification100 questions, 6 hours (Limited, Intermediate, Unlimited)Unlimited: $200 a year; 8 hours of CE a year
GeorgiaRules ch. 121-3 (secondary source: Cornell LII copy)Electrical Contractor, Class I or Class IIAt least 4 years of primary experience; age 21 or olderScore of 70 or higherNot stated in the rule
FloridaElectrical Contractors' Licensing BoardCertified electrical contractor (statewide); journeyman licenses are localAt least 4 years as a supervisor or contractor in the trade (one of several routes)Certification examinationNot covered here
ArizonaRegistrar of ContractorsContractor license through a qualifying partyFour years' practical or management trade experience, two of them within the last ten yearsWritten exam taken not more than two years before applying, if requiredNot covered here
Texas, North Carolina, Georgia, Florida and Arizona are the Partner Program markets. Iowa, Montana and Maryland are included because they define a state master license on official pages we could read. The NCBEEC, Georgia, Florida and Arizona sources we read do not create a separate state master electrician license.

Requirements change

Boards change hours, fees and exam rules between our checks, and cities can add their own licenses. Confirm every requirement with the state board before you apply.

Business vs personal

Do you need a master license to run an electrical business?

In Texas and Iowa, yes, or you must employ someone who has one: the electrical contractor license rests on a master electrician. In North Carolina, Georgia, Florida and Arizona the state licenses the contracting business through a qualified individual or qualifying party, without a separate master electrician license at state level.

  • Texas: you must employ a licensed Master Electrician to apply for an Electrical Contractor license, and the Master may also be the business owner. A Master may be assigned to only one contractor unless he owns more than 50 percent of it.
  • Iowa: an Electrical Contractor either is licensed as a Master A or B Electrician or employs one. Iowa Code section 103.8 lets only a contractor or a Class A or B master plan, lay out or supervise electrical installations for another person.
  • Montana: a master licensee must be the responsible electrician for an unlimited electrical contractor.
  • North Carolina: the qualified individual is the qualified person holding the electrical license, and each place of business needs at least one listed qualified individual regularly on active duty.
  • Florida and Arizona: a Florida certified electrical contractor holds a geographically unlimited certificate of competency issued by the department; Arizona's registrar of contractors issues contractor licenses after a qualifying party meets the experience and exam rules.

How the business layer and the crew layer fit together, with the qualifier rules owners need, is covered in electrical license: what the business needs vs what your electricians need. The contractor licenses for each state are compared in the electrical contractors license guide.

Steps

Steps to get a master electrician license

The route is the same shape everywhere it exists: log journeyman experience, get it signed off, apply to the board, sit the exam once approved, then keep the license with renewals and continuing education. The BLS notes that most electricians first learn the trade in a 4- or 5-year apprenticeship program.

  1. Experience and exam

    Document every hour. In Texas, each supervisor signs an Experience Verification Form, and Journeyman Industrial Electrician experience may not be used to qualify for a Master license; a municipal or regional master license holder may verify his own hours. Texas exams are given through PSI and are open book. Iowa requires a score of 70 or higher, Montana 75% or higher.

  2. Insurance and bond

    A master license on its own is a personal license. Insurance and bonds attach to the contracting business: for example, a Texas Electrical Contractor needs liability insurance of at least $300,000 per occurrence, and North Carolina requires a statement of bonding ability to activate Intermediate and Unlimited licenses. Each state's figures are in the electrical contractors license guide.

  3. Business registration

    If you plan to run your own shop with your master license, the SBA says to choose a business structure before you register your business with the state, and the IRS issues an EIN online, in minutes and for free. Then apply for the contractor license that rests on your master license.

Young man writing in a notebook at a bare wooden table

State by state

State notes: the five Partner Program markets and other states

Texas has the clearest master ladder of our five markets. North Carolina, Georgia, Florida and Arizona each put the weight on the contractor license. Iowa, Montana and Maryland show how far master requirements can differ: from one year as a licensed journeyman to seven years under a master.

  • Texas: a Master Electrician is licensed to install, maintain or extend an electrical wiring system. Licenses are valid for one year and renew annually. Full detail in the Texas electrical license guide.
  • North Carolina: the Unlimited license allows any electrical contracting project regardless of value, at $200 a year. NCBEEC says experience requirements to sit for the exam vary by classification.
  • Georgia: Class I Electrical Contractor licenses are restricted to single-phase installations that do not exceed 200 amperes; Class II licenses are unrestricted (secondary source: Cornell LII copy of Ga. Comp. R. & Regs. r. 121-3-.01).
  • Florida: state law creates an Electrical Contractors' Licensing Board for contractors, while counties and municipalities issue journeyman licenses, to applicants with a registered apprenticeship or at least 12,000 hours of on-the-job training. More in the Florida electrical contractors license guide.
  • Arizona: the qualifying party needs four years' practical or management trade experience, and credited technical training may not exceed two years of the four.
  • Iowa: a Class A master needs one year as a licensed journeyman and an exam score of 70 or higher; the license costs $375 for three years.
  • Montana and Maryland: Montana requires four years of licensed journeyman experience; Maryland requires seven years under a Maryland master before the master exam, after a journeyperson exam that itself needs four years under a master.

First jobs

After the master license: getting your first jobs

A master license lets you qualify a contracting business, but it does not bring work on its own. Set your rate from real costs, start with your own Google Business Profile and website, and judge every lead source by cost per closed job rather than cost per lead.

Licensed and ready for work?

Through the Partner Program, we build and run a local brand for your trade and ZIP codes. You answer the calls and do the work. The commission is 20% of the labor on service and repair jobs, and 15% of the net on installations and replacements, with no setup fee and no monthly fee: how commission works. You do the work under your own license and insurance. We are not a contractor.

FAQ

Master electrician license questions

Is getting a master electrician license worth it?

It depends on your plans. In Texas and Iowa, an electrical contracting business needs a master, so the license is the way to run your own shop without hiring one. The BLS reports a median electrician wage of $63,190 in May 2025, with the highest 10 percent above $108,510; it does not publish pay by license level.

What is the highest electrician license?

Where a state issues one, the master license sits above the journeyman license: Texas requires a Journeyman license held at least two years before a Master license, and Iowa one year as a licensed journeyman. The contractor license is a business license, not a higher personal one. North Carolina, Georgia, Florida and Arizona license the contractor at state level instead of a master electrician.

How do I get my master electrician license?

Earn the journeyman license, log the required journeyman experience, apply to your state board with signed experience records, and pass the exam once approved. In Texas that means two years as a Journeyman, 12,000 hours of on-the-job training, a $45 application and an open-book PSI exam.

How long does it take to get a master electrician license?

It depends on the state. Texas asks for a Journeyman license held at least two years and 12,000 hours of training; Iowa one year as a licensed journeyman; Montana four years of licensed journeyman experience; Maryland seven years under a Maryland master. The journeyman stage comes first, and the BLS says most apprenticeships last 4 or 5 years.

Sources

Sources

Sources

  1. TDLR: Apply for a New Master Electrician License (opens in a new tab)Accessed
  2. TDLR: Renew a Master Electrician License (opens in a new tab)Accessed
  3. TDLR: Electrician Exam Information (opens in a new tab)Accessed
  4. TDLR: Electrician Continuing Education (opens in a new tab)Accessed
  5. TDLR: Apply for a New Electrical Contractor License (opens in a new tab)Accessed
  6. Iowa DIAL: Electrical Licensing FAQs (opens in a new tab)Accessed
  7. Iowa Code chapter 103 (PDF, Iowa Legislature) (opens in a new tab)Accessed
  8. 481 IAC chapter 401 (PDF, Iowa Legislature) (opens in a new tab)Accessed
  9. Montana State Electrical Board: Master Electrician (opens in a new tab)Accessed
  10. Maryland State Board of Electricians: License Requirements (opens in a new tab)Accessed
  11. NCBEEC: Licensing (opens in a new tab)Accessed
  12. NCBEEC: Examinations (opens in a new tab)Accessed
  13. NCBEEC: FAQ (opens in a new tab)Accessed
  14. Ga. Comp. R. & Regs. r. 121-3-.01, Statewide Electrical Contractor License (secondary source: Cornell LII copy) (opens in a new tab)Accessed
  15. Florida Statutes s. 489.505 (definitions) (opens in a new tab)Accessed
  16. Florida Statutes s. 489.507 (Electrical Contractors' Licensing Board) (opens in a new tab)Accessed
  17. Florida Statutes s. 489.511 (certification, experience) (opens in a new tab)Accessed
  18. Florida Statutes s. 489.5335 (journeyman) (opens in a new tab)Accessed
  19. Arizona Revised Statutes s. 32-1122 (qualifications for license) (opens in a new tab)Accessed
  20. BLS Occupational Outlook Handbook: Electricians (opens in a new tab)Accessed
  21. SBA: Launch your business (opens in a new tab)Accessed
  22. IRS: Get an Employer Identification Number (opens in a new tab)Accessed

Next steps

Where to go from here

  • Your trade

    How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.

    See your trade
  • Run your numbers

    A free calculator to check the margin on a job before you price it.

    Open the calculator
  • Licensing

    What you need to run a trade business legally, from official sources.

    All licensing guides
  • How the Partner Program works

    We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.

    See the Partner Program
  • Apply to the Partner Program

    Calls from your own area under a local brand. Commission only on closed jobs.

    Apply

Last reviewed: