Skip to content
Gloved installer connecting wiring on a rooftop solar racking rail in Tampa, Florida

Licensing

Electrical Contractors License in Florida (2026): How to Qualify an Electrical Business

By· Founder, Made For BuildersReviewed

Summary

Florida electrical contractor licenses at a glance

Florida has two routes to an electrical contractor license, both under the ECLB within the Department of Business and Professional Regulation (DBPR). A certified license comes from passing the state exam, and Florida law defines the certificate as geographically unlimited. A registered license comes from a local certificate of competency and covers only the jurisdiction for which it is issued.

Certified vs registered electrical contractor in Florida (Florida Statutes and DBPR checklists, checked 2026-11-10)
ItemCertified Electrical Contractor (EC)Registered Electrical Contractor (ER)
Where you can workStatewide: the certificate is geographically unlimited (s. 489.505)Only the jurisdiction and type of work covered by the registration (ss. 489.505, 489.513)
How you qualifyPass both parts of the state exam, then prove experienceFile a current local certificate of competency, with evidence of a local exam (s. 489.513)
ExperienceOne of the s. 489.511 routes; for EC, at least 40% of it in 3-phase servicesThrough the local certificate of competency you register
Fee caps (s. 489.509)Initial application and exam: up to $400; biennial renewal: up to $400Initial application: up to $150; biennial renewal: up to $200
RenewalEvery two years, with at least 11 classroom hours of continuing educationEvery two years, with at least 11 classroom hours of continuing education
DBPR issues both once the ECLB finds the applicant qualified. Insurance, workers' compensation and financial responsibility rules apply to both; see the steps below. The Board sets the exact fees by rule within these caps, and the application fee is nonrefundable.

License

Do you need a license to run an electrical business in Florida?

Yes. Florida law says a person may not practice contracting unless the person is certified or registered, and may not employ people who are not certified or registered to practice contracting. A company contracts through a qualifying agent: the certificate is issued in that person's name, with the business organization noted on it.

Qualifying a business is a real commitment. Florida law defines the primary qualifying agent as the person who has the responsibility to supervise, direct, manage and control the electrical or alarm system contracting activities of the business. If the only qualifying agent leaves, the statute gives the business 60 days to qualify another person. Your certificate or registration number must appear on each building permit application and in each offer of services, business proposal or advertisement, regardless of medium (s. 489.521).

Journeyman licenses work differently. Under s. 489.5335, counties and municipalities issue journeyman licenses in the electrical and alarm system trades. For an owner, the journeyman card is a step toward the contractor license, not a license to run the business.

Requirements change

This page summarizes Chapter 489, Part II, and s. 440.02, Florida Statutes, and DBPR's application checklists as we read them on November 10, 2026. Board rules (Chapter 61G6, Florida Administrative Code) set the exact fees and insurance amounts; those rules and the current application forms have the final word. Confirm with the ECLB.

Steps

Steps to get a certified electrical contractor license

The order is: apply to sit the exam, pass both parts, then file the initial license application with proof of experience, credit reports, insurance and fingerprints. DBPR issues the certificate once the ECLB certifies that you are qualified. Your passing scores cannot be more than 3 years old when you apply.

  1. 1. Experience and exam

    You must be at least 18 to apply for the exam, which has two parts and is offered on computer. Florida law accepts several experience routes, including at least 4 years as a supervisor or contractor in the trade within the last 8 years, at least 3 years of management experience within the last 6, or a combination of the listed routes totaling 6 years. For the unlimited EC license, at least 40% of the experience must be in 3-phase services.

  2. 2. Financial responsibility

    The initial application asks for a personal credit report, plus a business credit report and a business financial statement showing a net worth of at least $10,000. You also submit fingerprints through a Livescan provider registered with FDLE right after you apply.

  3. 3. Insurance and workers' compensation

    You attest that you hold public liability and property damage insurance in the amounts set by Board rule, and you must obtain workers' compensation coverage or an exemption within 30 days of issuance. Under s. 440.02, no more than three officers of a corporation in the construction industry may elect to be exempt from workers' compensation, and each must own at least 10 percent of the stock.

  4. 4. Business registration

    If you qualify a corporation, the application states the name of the corporation and its officers and directors (s. 489.521). The SBA says to choose a business structure before you register with the state, and the IRS issues an EIN online, in minutes and for free.

Costs

Florida electrical contractor license fees

Florida law caps the fees and leaves the exact amounts to Board rule. Under s. 489.509, the initial application and examination fee for certification may not exceed $400 and the initial registration application fee may not exceed $150. The biennial renewal fee may not exceed $400 for certificateholders and $200 for registrants. The application fee is nonrefundable.

Statutory fee caps, s. 489.509, Florida Statutes (checked 2026-11-10)
ItemCap
Initial application and examination, certified electrical contractorUp to $400
Initial application, registrationUp to $150
Biennial renewal, certificateholderUp to $400
Biennial renewal, registrantUp to $200
Insurance, credit reports, fingerprintsSet by your providers; we do not estimate them
These are legal maximums, not the amounts DBPR charges today. The ECLB sets the current fees by rule (Rule 61G6-8.001, Florida Administrative Code); check the application before you pay.

Licensing fees are small next to insurance, vehicles and tools. To check whether your prices will cover those costs, run a few typical jobs through the job profit margin calculator and the electrical pricing guide.

Endorsement

Moving to Florida with an out-of-state license

Florida offers certification by endorsement rather than automatic reciprocity. Section 489.511(5) lists three routes: passing an exam substantially equivalent to Florida's while meeting the certification requirements, holding a license from a state whose criteria were substantially equivalent, or holding a valid, current license from another state for at least 10 years.

Under the 10-year route, you apply for the same or similar license in Florida, either while the out-of-state license is active or within 2 years after it was last active. Electrical and alarm contractors must also complete a 2-hour course on the Florida Building Code, according to s. 489.511. In each case, you file an application and the ECLB reviews it.

White single-story house with a tile roof framed by tall palm trees

Other states

Florida and other states

Each state licenses electrical contractors through its own regulator, with its own exam and experience rules. If you work across state lines, plan for a separate license in each state. Our market pages summarize the regulators in our five launch states, and our licensing guides cover New Jersey and California.

First jobs

After the license: getting your first electrical jobs in Florida

A license makes the business legal, not busy. Most new electrical contractors start with a Google Business Profile, a simple website and reviews from early customers, then add paid lead sources once they know their margins. Track each channel by what it costs per closed job, not per lead.

Licensed and ready for work in Florida?

Florida is one of our launch markets. Through the Partner Program, we build a local brand for your area and pass its calls to you. The commission is 20% of the labor on service and repair jobs, and 15% of the net on installations and replacements, with no setup fee and no monthly minimum: how commission works. We check your license before your brand goes live. Made For Builders is not a contractor: you do the work under your own license and insurance.

FAQ

Florida electrical contractor license: questions

How do I get my electrician license in Florida?

It depends on the license. Journeyman licenses are issued by counties and municipalities under s. 489.5335. To contract, you apply to the ECLB: pass the two-part state exam for a certified license, or register a local certificate of competency for a registered license.

What is the difference between a certified and a registered electrical contractor?

A certified contractor passed the state certification exam and holds a certificate that Florida law calls geographically unlimited. A registered contractor filed a local certificate of competency with DBPR and may contract only in the jurisdiction, and for the type of work, covered by the registration.

Is there a Florida license that covers all electrical work?

Florida law calls it the unlimited electrical contractor, and s. 489.537 says its scope of work includes the work of a certified alarm system contractor. Specialty contractors, such as residential electrical contractors, are limited to a segment of electrical or alarm system contracting set by Board rule.

How often do you renew a Florida electrical contractor license?

Every two years: the statute calls for biennial renewal. Electrical contractors must complete at least 11 classroom hours of continuing education each biennium, at least 7 of them on technical subjects, and DBPR renews only with proof of meeting all continuing education requirements. The renewal fee for certificateholders may not exceed $400.

How much do electricians make a year?

The BLS reports a national median annual wage of $63,190 for electricians in May 2025. That is an employee wage, not business income; BLS publishes state figures in its State & Area Data. No official source publishes what electrical contracting businesses earn.

Sources

Sources

Sources

  1. DBPR: Certified Electrical Contractor, Examination (ECLB 8) checklist (opens in a new tab)Accessed
  2. DBPR: Certified Electrical Contractor, Initial (ECLB 1) checklist (opens in a new tab)Accessed
  3. DBPR: Certified Electrical Contractor, Initial (ECLB 1) checklist, insurance and fingerprints (opens in a new tab)Accessed
  4. Florida Statutes s. 489.505 (definitions) (opens in a new tab)Accessed
  5. Florida Statutes s. 489.507 (Electrical Contractors' Licensing Board) (opens in a new tab)Accessed
  6. Florida Statutes s. 489.509 (fees) (opens in a new tab)Accessed
  7. Florida Statutes s. 489.511 (certification; endorsement) (opens in a new tab)Accessed
  8. Florida Statutes s. 489.513 (registration) (opens in a new tab)Accessed
  9. Florida Statutes s. 489.515 (issuance of certificates; registrations) (opens in a new tab)Accessed
  10. Florida Statutes s. 489.517 (renewal; continuing education) (opens in a new tab)Accessed
  11. Florida Statutes s. 489.521 (business organizations; qualifying agents) (opens in a new tab)Accessed
  12. Florida Statutes s. 489.531 (prohibitions) (opens in a new tab)Accessed
  13. Florida Statutes s. 489.5335 (journeyman) (opens in a new tab)Accessed
  14. Florida Statutes s. 489.537 (application of this part) (opens in a new tab)Accessed
  15. Florida Statutes s. 440.02 (workers' compensation definitions) (opens in a new tab)Accessed
  16. SBA: Launch your business (opens in a new tab)Accessed
  17. IRS: Get an Employer Identification Number (opens in a new tab)Accessed
  18. BLS Occupational Outlook Handbook: Electricians (opens in a new tab)Accessed

Next steps

Where to go from here

  • Your trade

    How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.

    See your trade
  • Run your numbers

    A free calculator to check the margin on a job before you price it.

    Open the calculator
  • Working in this state

    Who regulates your trade here, the official sources and where we are recruiting partners.

    See the state page
  • Licensing

    What you need to run a trade business legally, from official sources.

    All licensing guides
  • How the Partner Program works

    We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.

    See the Partner Program
  • Apply to the Partner Program

    Calls from your own area under a local brand. Commission only on closed jobs.

    Apply

Last reviewed: