Skip to content
Electrician in a white hard hat and gloves drives a screw into a wall plate with a cordless drill

Pricing tools

Electrician Hourly Rate Calculator (2026): What to Charge Per Hour

By· Founder, Made For BuildersReviewed

Find the hourly rate you need to charge as an electrician

Enter the take-home pay you want, your annual overhead, health insurance and benefits, the hours you bill each week, the weeks you work and a tax buffer. You get the hourly rate, the 8-hour day rate, billable hours per year and the pre-tax revenue the business needs. Nothing leaves your browser.

Your numbers
$

What you actually want in your pocket, after every business cost.

$

Liability insurance, tools, truck/vehicle, software, phone, fuel, bookkeeping.

$

What you pay for health coverage and retirement that an employer used to cover for you.

30 h

Hours you actually invoice, not the ones you work. Driving, estimates and paperwork do not count.

48

After vacation, sick days, holidays and slow weeks.

25 %

Self-employment tax alone is ~15.3%. Add federal and state income tax on top — 25% is a realistic starting point.

What you should charge per hour
Hourly rate to charge$96to take home what you want after tax, overhead and benefits
Day rate (8h)$770
Billable hours/year1,440
Overhead + benefits$34,000
Pre-tax revenue needed$138,667

Heads up: if your real rate is well below this, you are underpricing — most contractors do, because they price on hours worked, not billable hours, and forget that self-employment tax (~15.3%) plus income tax come straight out of every invoice. The tax buffer here covers both. This is a directional break-even-plus model, not a precise tax return — confirm your actual rates with a CPA.

Electrician hourly rate: wage data vs billed rate

Search results for an electrician's hourly rate mix two numbers. One is what electricians are paid, which the BLS publishes. The other is what a customer is billed per hour, which neither the BLS nor any other primary source we checked publishes. This page uses the first to build the second.

Published inputs for an electrician's rate, and the one figure nobody publishes
InputFigureSource and date
Median pay, electricians$30.38 an hour, $63,190 a yearBLS Occupational Outlook Handbook, May 2025
Pay rangeLowest 10%: under $42,640. Highest 10%: over $108,510BLS Occupational Outlook Handbook, May 2025
Median at electrical contractors and other wiring installation contractors$61,570 a yearBLS Occupational Outlook Handbook, May 2025
Median in manufacturing$74,550 a yearBLS Occupational Outlook Handbook, May 2025
Median in government (excluding state and local education and hospitals)$79,820 a yearBLS Occupational Outlook Handbook, May 2025
Employer compensation cost, private industry$46.89 per hour worked; benefits 30.0% of itBLS Employer Costs for Employee Compensation, June 2026
Self-employment tax rate15.3% (12.4% Social Security, 2.9% Medicare)IRS, read November 2026
Average billed rate per hour, national or by stateNot publishedNo primary source we found collects it
The employer cost figure covers all private-industry occupations, not electricians alone. State and metro wages for electricians are in the BLS Occupational Employment and Wage Statistics program.

The wage figure moves with the employer. Electricians working at electrical contractors had a lower median ($61,570) than those in manufacturing or government. If you hire, check the wage for your metro area before you set pay, and set your billed rate from what that pay costs you, not from the wage itself.

How to set the price: the formula behind the calculator

Hourly rate = (take-home pay + overhead + benefits) / (1 - tax buffer) / billable hours per year. With the calculator's default inputs, $70,000 take-home, $25,000 overhead, $9,000 benefits, a 25% tax buffer and 30 billable hours a week for 48 weeks, an electrician needs to bill $96.30 an hour.

Every input is your own number. The defaults are there so the calculator shows a result when the page loads; they are not an industry benchmark. The next three sections take labor, overhead and margin one at a time.

Cost of labor: pay, burden and billable hours

Labor cost is more than the wage. It includes payroll taxes and benefits, or self-employment tax if you work alone, and it has to be spread over billable hours only. A full-time year is about 2,080 paid hours; the hours you can invoice are fewer, and the gap is part of the rate.

The BLS says almost all electricians work full time, which is about 2,080 paid hours a year. Not all of them can be invoiced. Driving between jobs, pulling permits, waiting on inspections, quoting, picking up material and returning for punch-list items are paid hours with nobody to bill. The calculator asks for billable hours per week for that reason: read them off a few months of invoices, not your timesheets.

If you are self-employed, the IRS sets the self-employment tax rate at 15.3%: 12.4% for Social Security and 2.9% for Medicare. Income tax comes on top. The calculator's 25% tax buffer is a default input, not a published rate; ask a CPA what yours should be.

How the take-home target moves the rate (calculator defaults otherwise; illustrative)
Take-home payPre-tax revenue neededHourly rate (1,440 billable hours)8-hour day rate
$50,000$112,000.00$77.78$622.22
$70,000 (default)$138,666.67$96.30$770.37
$90,000$165,333.33$114.81$918.52
$120,000$205,333.33$142.59$1,140.74
Each row: (take-home + $25,000 overhead + $9,000 benefits) / 0.75 / 1,440 hours. Example inputs, not a benchmark.

Overhead electricians forget to price in

Overhead is every cost that does not belong to one job: the van, insurance, licenses, tools, software, bookkeeping and the cost of getting work. Add twelve months of it from your bank statements and enter the total in the calculator. Any cost you leave out comes straight out of your own pay.

Overhead is every cost that does not belong to a single job. For an electrical shop the usual list is the van and its fuel, insurance and maintenance; general liability insurance and any bond your state or city asks for; license renewals and continuing education; meters, testers and power tools; code books; phones, scheduling and estimating software; bookkeeping; and the cost of getting work, from ads to pay-per-lead fees to commission on closed jobs. Licensing costs vary by state and are covered in the electrical license guide.

Weathered electrical service boxes and conduit on the brick wall of a commercial building

Margin vs markup on an electrical rate

Margin is profit as a share of the price; markup is profit as a share of the cost. A 30% markup gives a 23.1% margin, and a 30% margin needs a 42.9% markup. Pick which one you are targeting before you build it into the hourly rate or a price list.

Worked through on a $100 cost: a 30% markup on a $100 cost gives a $130 price and a 23.1% margin, while a 30% margin on the same cost needs a $142.86 price, a 42.9% markup. Decide which one you are targeting before you put it into a rate, and check finished prices with the job profit margin calculator.

The calculator's take-home figure is your pay, not the profit the business keeps. If you want the business to build a reserve for slow months, a new van or a second crew, add that amount to overhead or raise the take-home target.

From an employed electrician's wage to a billed hour

When you employ the electrician, start from the wage. Example only: the $30.38 BLS median, loaded with a 30.0% benefits share, costs $43.40 per paid hour. Billing 6 of 8 paid hours makes it $57.87 per billable hour. With 25% overhead and a 30% margin, the billed rate comes to $103.34 an hour.

  1. Wage

    $30.38 an hour, the BLS median for May 2025. Replace it with your payroll rate.

  2. Load it

    $30.38 / 0.70 = $43.40 per paid hour, if your benefits share matched the private-industry average of 30.0% (June 2026). Your workers' comp class, payroll taxes and health plan set your real figure.

  3. Spread over billable hours

    $43.40 x 8 / 6 = $57.87 per billable hour, if the electrician bills 6 of 8 paid hours. Measure your own ratio.

  4. Add overhead

    $57.87 x 1.25 = $72.34 with overhead at 25% of direct cost.

  5. Add margin

    $72.34 / 0.70 = $103.34 an hour at a 30% target margin.

Every number in the chain is an example input; the method is what carries over. Apprentices cost less per hour, since the BLS notes apprentices receive less pay than fully trained electricians, but they also bill fewer hours on their own, so run the chain separately for each person on the crew.

Flat rate vs time and materials

Time and materials bills the hourly rate plus parts, so the customer carries the risk that the job runs long. Flat rate fixes the price in advance, so you carry that risk. Both start from the same hourly rate: a flat price is the rate times the hours a task usually takes, plus materials and margin.

  • Time and materials suits work you cannot scope before you open the wall: tracing a fault, old wiring, intermittent breakers. Your margin per hour stays fixed.
  • Flat rate suits tasks you repeat and have timed: a device swap, a fixture install, a dedicated circuit, a panel change on a known house type. The customer sees one price; your margin rises or falls with how long the task takes.
  • A fixed quote per job suits remodels, additions and commercial fit-outs, priced from a written scope after a site visit. The commercial electrical pricing guide covers bids and progress billing.

Whichever you use, a wrong hourly rate carries into every price built on it. Fix the rate first.

Building the price list and applying it on the job

Turn the hourly rate into a short price list: your 20 or 30 most common tasks, each with the hours it usually takes, materials and margin. On site, quote from the list for routine work and switch to time and materials when the job is not what the list assumed. Review it when costs change.

  1. Fix the rate

    Run your own numbers through the calculator above and note the hourly and 8-hour day rate.

  2. Pick the tasks

    Go through a year of invoices and list the tasks you do most often.

  3. Time each task

    Use your own average hours per task, including setup, testing and cleanup, not a manufacturer's install time.

  4. Price each task

    Hours x hourly rate, plus materials at your supplier cost and markup, dated so you know when to update it.

  5. Use it on site

    Show the price before you start. If the job differs from the task as listed, say so, and quote the difference or switch to time and materials.

  6. Review

    Recheck the rate and the list when wages, insurance or supplier prices change, and compare finished jobs against the list.

The wider method, including estimates for larger jobs, is in the electrical pricing guide. For how the same rate turns into a marketing budget, see marketing for electricians.

Your rate is set. Now fill the schedule: partners get the calls from their area. 20% of the labor on service and repair jobs, 15% of the net on installations and replacements. No setup fee, no monthly fee, no pay-per-lead. Made For Builders is not a contractor. More on the electricians page.

Electrician hourly rate FAQ

What are the electrician rates for 2026?

The latest BLS wage data, for May 2025, puts the median electrician wage at $30.38 an hour, or $63,190 a year. No primary source publishes what electricians bill customers per hour. With the calculator's default inputs, the rate an electrician needs to charge is $96.30 an hour; your own costs set yours.

Can you make $200,000 a year as an electrician?

The BLS does not publish how many electricians earn that much; it reports that the highest 10 percent earned more than $108,510 in May 2025, as wages. As a business owner, the calculator shows what it takes: $200,000 take-home with the other default inputs means billing $216.67 an hour for 1,440 hours a year.

What is a reasonable day rate for an electrician?

Your hourly rate times the hours in the day you can bill. The calculator gives an 8-hour day rate: $770.37 with its default inputs. No primary source publishes a typical day rate, so build yours from your own costs rather than copying one.

What pays more, HVAC or electrical?

On median wages, electrical, by a small margin. The BLS reports $63,190 for electricians and $61,010 for heating, air conditioning and refrigeration mechanics and installers, both for May 2025. Those are employee wages; what a business can bill depends on its own costs, not on the trade.

Why is an electrician's billed rate higher than the wage?

Because the billed hour pays for more than the wage: benefits and payroll taxes, the paid hours nobody can invoice, the van, insurance, licenses, tools and profit. In the example on this page, a $30.38 wage becomes a $103.34 billed hour.

Sources and method

Wage, benefit and schedule figures come from the BLS pages below and the self-employment tax rate from the IRS, all read on 10 November 2026. Every rate, day rate and loaded cost on this page is our arithmetic on illustrative inputs, labelled as such.

Next steps

Where to go from here

  • Your trade

    How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.

    See your trade
  • Run your numbers

    A free calculator to check the margin on a job before you price it.

    Open the calculator
  • Pricing tools

    Calculators for rates, margins and job prices.

    All tools
  • How the Partner Program works

    We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.

    See the Partner Program
  • Apply to the Partner Program

    Calls from your own area under a local brand. Commission only on closed jobs.

    Apply

Last reviewed: