Skip to content
Installer lifts a solar panel onto the clay-tile roof of a two-story stucco house on a sunny day

Guides

Electrical Advertising: Paid Media for Electricians and What Each Ad Must Show

By· Founder, Made For BuildersReviewed

Local Services Ads

Local Services Ads for electricians: per-lead billing and screening

Electrician is a Google Local Services category, and you pay per valid lead rather than per click. Before your ad runs, Google screens the business, which takes 3-4 weeks on average once documents are in. Ad position depends on your bid plus profile signals such as rating, review count and how fast you respond.

You need a public, verified Business Profile before you can advertise here; setting one up is part of electrician marketing. Screening may cover a background check, business registration, insurance and your electrical license. Everyone who passes now carries one Google Verified badge, and Google ended the Money Back Guarantee that came with the old Google Guarantee badge, so do not promise customers a refund from Google in your own ads.

Billing works per lead, and Google says lead prices vary by location, job type, type of lead and bidding mode. A lead Google judges invalid or low quality is not billed. Position in the results combines your bid with rating, number of reviews, average response time, images and completed verification checks, so a slow office costs you placement as well as jobs.

A missed call can still be billed

During business hours, a call you do not pick up counts as a valid lead when the caller stays on the line for more than 20 seconds, and Google says missed calls may hurt your responsiveness. If you are in an attic all afternoon, forward the line to someone who books jobs. More on speed: lead response time.

Google search

Google search ads for panel upgrades, EV chargers and generators

Search ads are the paid format where you choose the work. You pick keywords for jobs such as panel upgrades or EV charger installs, exclude the searches you do not want, and cap each click. Google bills only when someone clicks, and a daily budget times 30.4 gives the monthly media figure.

Give each high-value job its own campaign and its own landing page, so the report shows what a panel upgrade costs you apart from a generator install. Under cost-per-click bidding the maximum CPC is the most you agree to pay for a single click. Add negative keywords for searches you never want to pay for: people looking for electrician jobs, apprenticeship classes or a part number. Most new ads clear Google's review within one business day.

Put the phone number in a call asset so it shows with the ad; Google warns that typing a number into the ad text itself may get the ad disapproved. Your license number belongs on the landing page, where the rules below require it in several states. Walkthrough: Google Ads for home services.

Budget math. Google sets budgets per day and tells advertisers to multiply by 30.4 to get a month. Illustrative example (round numbers, not a forecast): $25 a day comes to $760 a month in clicks, before any management fee. Five booked jobs from that spend would be $152 each. The Google Ads ROI calculator adds your close rate and job value, and the marketing budget calculator sets the ceiling.

Direct mail

Direct mail: USPS Every Door Direct Mail for an electrical shop

Every Door Direct Mail sends a flyer or postcard to every address on the carrier routes you pick, without a mailing list. At retail, USPS charges $0.26 a piece, takes 200 to 5,000 pieces a day per ZIP Code and asks for no special mailing permit. Printing is extra and has no neutral public price.

In the EDDM Online Tool you search a ZIP Code, filter routes by residential count, age, household size and income, and can select several routes for one mailing. Pieces are addressed to "Postal Customer", so the route, not a list, decides who gets one. Larger mailers can enter bulk mail at a Business Mail Entry Unit with a permit instead, with no volume limit.

Postage example (arithmetic only): 2,000 retail pieces at $0.26 is $520 in postage before design and printing. Mail suits work tied to a neighborhood: older subdivisions likely to need panel replacements, or streets where you just finished a job. Florida's license-number rule covers advertisements regardless of medium, so the mailer carries the number like any other ad.

Vans and signs

Van lettering, wraps and yard signs: the license-number rules

A lettered van is advertising that also has to meet licensing rules. In Texas, an electrical contractor's business name and license number go on both sides of each work vehicle, in contrasting letters at least two inches high and permanently affixed, with the number preceded by TECL.

The Texas Department of Licensing and Regulation lists failing to include the contractor name and license number in advertising, and failing to letter both sides of each vehicle, among its enforcement violations for electricians. Its compliance guide gives the format with an example: license number 1234 reads "TECL 1234" on the door. More on the Texas license itself: Texas state electrical license.

Florida's electrical contracting law leaves business stationery and promotional novelties, such as balloons, pencils, trinkets or clothing, out of its definition of advertisement. Yard signs, wraps and print ads are not on that list, so treat them as ads. Keep the business name on the van identical to the one on your Google listing, so a neighbor who notes the van finds the right reviews.

The rules

What every electrical ad must say (and must not)

Federal law asks for truthful ads backed by evidence; states add license-number rules. The FTC says advertising must be truthful and non-deceptive. Florida wants the electrical contractor's number in each advertisement regardless of medium, Arizona wants the ROC number on published advertising, and Texas wants name and number in ads and on vans.

License-number and truth-in-advertising rules for electrical contractors (official sources, read 17 Nov 2026)
WhereWhat it saysSource
Federal (FTC)Advertising must be truthful and non-deceptive; advertisers must have evidence to back up their claimsFTC, Advertising FAQs for small business
FloridaLicense number stated in each offer of services, business proposal or advertisement, regardless of medium; fine of not less than $100 or a citation if missingFla. Stat. s. 489.521
ArizonaLicense number, preceded by "ROC", on all published advertising; broadcast, internet or billboard ads may instead link to a site that displays itA.R.S. s. 32-1124
ArizonaFalse, misleading or deceptive advertising that misled and injured a member of the public is a ground for disciplineA.R.S. s. 32-1154
TexasContractor name and license number in advertising; on both sides of each work vehicle, at least two inches highTDLR, 16 TAC ch. 73 and Occ. Code s. 1305.166
Other states have their own rules; ask your licensing board before you print. State requirements: electrical contractors license.

Claims that need proof

"Licensed and insured", "24/7" and "same-day" are claims. Under the FTC standard you need evidence to back them up, and in Florida claiming in an advertisement to be a certified or registered contractor without holding a valid certification or registration is a misdemeanor.

Who runs the ads

If someone else runs your ads: what Google requires of them

A third party that manages Google ads for you must tell you what Google actually charged, separate from its own fee, and disclose that fee in writing and on every invoice. Ask also who checks license numbers and claims in each ad, because the fine lands on your license, not theirs.

Google's transparency policy for third-party advertisers covers the money side. The compliance side is yours to put in the agreement: who reviews each van design, mailer and landing page against your state's rules before it goes out. Ownership of accounts, exit terms and how to compare proposals are in electrician marketing.

Rather not buy media? Commission applies only to closed jobs. Made For Builders is not a contractor.

FAQ

Electrical advertising FAQ

What are the types of advertising an electrician can pay for?

Local Services Ads (billed per valid lead), Google search ads (billed per click), direct mail such as USPS Every Door Direct Mail (billed per piece), and one-off costs such as van lettering, yard signs and print ads. Free channels are in electrician marketing.

Do I have to put my license number on my ads and my truck?

In several states, yes. Florida requires the electrical contractor's number in each advertisement regardless of medium, Arizona requires the ROC number on published advertising, and Texas requires name and number in ads and on both sides of each work vehicle. The BLS notes that most states require electricians to be licensed.

How much do Local Services Ads cost for electricians?

Google publishes no price. Each valid lead is billed, with prices varying by location, job type, type of lead and bidding mode, and leads judged invalid or low quality are not billed.

How much does Every Door Direct Mail cost?

USPS lists EDDM Retail at $0.26 a piece and bulk entry through a Business Mail Entry Unit at as low as $0.259 a piece, for flats up to 3.3 oz. Printing is not included.

Can I put my phone number in a Google search ad?

Use a call asset. Google warns that a phone number placed elsewhere in the ad text may lead to disapproval.

Sources

Sources and method

Each rule and price here was read on the official page listed below, most recently on 17 November 2026, and saved as a capture. We name no sign shops, printers or agencies. Budget and postage examples are arithmetic on round numbers, not quotes.

Sources

  1. Google Local Services Help: How leads work (opens in a new tab)Accessed
  2. Google Local Services Help: About ad rankings (opens in a new tab)Accessed
  3. Google Local Services Help: About Google Verified badge (opens in a new tab)Accessed
  4. Google Local Services Help: Understand the screening and verification process (opens in a new tab)Accessed
  5. Google Local Services Help: Business screening and verification requirements (opens in a new tab)Accessed
  6. Google Ads Help: Using Google Ads for online marketing (opens in a new tab)Accessed
  7. Google Ads Help: Choose your bid and budget (opens in a new tab)Accessed
  8. Google Ads Help: About negative keywords (opens in a new tab)Accessed
  9. Google Ads Help: About call assets (opens in a new tab)Accessed
  10. Google Ads Policy Help: About the ad review process (opens in a new tab)Accessed
  11. Google Ads Policy Help: Transparency requirements for third-party advertisers (opens in a new tab)Accessed
  12. USPS: Every Door Direct Mail (opens in a new tab)Accessed
  13. TDLR: Electricians Compliance Guide (contractor vehicles) (opens in a new tab)Accessed
  14. TDLR: Electricians Penalties and Sanctions (opens in a new tab)Accessed
  15. Federal Trade Commission: Advertising FAQs, a guide for small business (opens in a new tab)Accessed
  16. Florida Statutes s. 489.521 (electrical contracting: business organizations, qualifying agents) (opens in a new tab)Accessed
  17. Arizona Revised Statutes s. 32-1124 (opens in a new tab)Accessed
  18. Arizona Revised Statutes s. 32-1154 (opens in a new tab)Accessed
  19. BLS Occupational Outlook Handbook: Electricians (opens in a new tab)Accessed

Next steps

Where to go from here

  • Your trade

    How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.

    See your trade
  • Run your numbers

    A free calculator to check the margin on a job before you price it.

    Open the calculator
  • Growth guides

    How trade businesses get more booked jobs, channel by channel.

    All growth guides
  • How the Partner Program works

    We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.

    See the Partner Program
  • Apply to the Partner Program

    Calls from your own area under a local brand. Commission only on closed jobs.

    Apply

Last reviewed: