Skip to content
Aerial view of a Texas suburb, curving streets lined with tree-shaded single-family homes

Licensing

Texas HVAC License (2026): TDLR Contractor Classes, Technician Registration, Exams and Fees

By· Founder, Made For BuildersReviewed

Summary

Texas HVAC licenses at a glance

Texas has no single "HVAC license". TDLR issues an ACR Contractor license to the person who runs or qualifies the business, and a technician registration or certification to the people who assist. Only the contractor license lets you contract with the public; a technician must work under a licensed contractor and may not advertise HVAC services.

TDLR air conditioning and refrigeration credentials (TDLR, checked 2026-11-17)
CredentialWhat it allowsTo qualifyApplication feeExamRenewal
Registered TechnicianAssist a licensed ACR contractor with maintenance or repair, under supervisionAge 16 or older; no experience required$20None$20 a year
Certified Technician (voluntary)Same work as a registered technician; the only title that may be called "certified technician"Age 18; 24 months of supervised work, or a TDLR-approved 2,000-hour program$50TX ACR Certified Technician exam$35 a year
ACR Contractor, Class BContract for cooling systems of 25 tons and under and heating systems of 1.5 million BTU/hour and underAge 18; 48 months of supervised experience in the past 72 months (or 36 months plus 12 months as a certified technician)$115Environmental Air B and/or Commercial Refrigeration B$65 a year plus 8 hours of CE
ACR Contractor, Class AContract on any size unitSame experience as Class B$115Environmental Air A and/or Commercial Refrigeration A$65 a year plus 8 hours of CE
Every credential is valid for one year from the date of issue. The exam for a contractor depends on the class and the endorsements you choose. Fees are TDLR's; PSI, TDLR's exam vendor, charges the exam fee separately.

Requirements change

TDLR and PSI set these fees and rules and can change them between our checks. Confirm every requirement with TDLR before you apply, hire or quote.

Contractor vs technician

Do you need an HVAC license to work in Texas?

Yes, if you contract with the public. Section 1302.251 of the Occupations Code says a person may not engage in air conditioning and refrigeration contracting without an ACR contractor license. Anyone who assists a licensed contractor with maintenance or repair must at least register as a technician. Working without either is a Class C misdemeanor.

The two layers work like this. The company must employ full-time, in each permanent office, a license holder whose license is assigned to that company, and a contractor can assign a license to only one permanent office of one company. If the company signs a contract without that license holder in place, the statute says it may not collect a fee or otherwise enforce the contract. That is the rule that matters most for a new owner who plans to hire a licensed contractor rather than hold the license personally.

  • Statewide license: a TDLR contractor license is valid throughout the state, so you do not need a separate city license to contract in a Texas municipality.
  • Endorsements limit the work: the license carries Environmental Air Conditioning (human comfort: central heating and cooling), Commercial Refrigeration and Process Cooling or Heating, or both. A license holder may not do work for which the license is not endorsed.
  • Mini-splits are covered: TDLR's FAQ says a mini-split is not a self-contained unit, so contracting work on one requires a contractor license.
  • Technicians cannot run a business: registered and certified technicians must work under a licensed contractor and may not advertise air conditioning and refrigeration services.
  • Under 18: a technician younger than 18 must at all times work under the direct supervision of a licensed contractor or a certified technician.

Separately, the federal EPA requires technicians who maintain, service, repair or dispose of equipment that could release refrigerants to hold Section 608 certification, earned by passing an EPA-approved test; the credential does not expire. See the EPA 608 guide for the four certification types.

Steps

How to get a Texas HVAC contractor license

Log supervised experience, apply to TDLR with the $115 fee, pass the PSI exam for your class and endorsements, then file a certificate of insurance. TDLR gives you one year from the date you file the application to finish everything, including the exam. A criminal history review, if needed, takes one to six weeks.

  1. 1. Build the experience

    You need 48 months of practical ACR work under a licensed contractor in the past 72 months. The shorter route is to hold a technician certification for 12 months and have 36 months of experience in the past 48. Your supervisors complete the Experience Verification Form; TDLR says not to complete it yourself. A degree, diploma or certification in air conditioning and refrigeration, an engineering license or degree, or military ACR training can qualify you for an exception.

  2. 2. Choose the class and endorsements, then apply

    The class and endorsements you choose determine the work you can do, the exam you take and the insurance you must carry. Send the ACR Contractor License Application with the $115 fee. You must be at least 18. TDLR runs a criminal history background check on every applicant.

  3. 3. Pass the PSI exam

    Once TDLR confirms you are eligible, PSI emails you to register and schedule. The contractor exams are TX Environmental Air A or B and TX Commercial Refrigeration A or B. If you fail, you can schedule a retake with PSI within 24 to 48 hours, and keep retaking until the application expires one year after you submitted it.

  4. 4. Insure and receive the license

    After passing, send TDLR a certificate of insurance that names the license holder and the business. Commercial general liability insurance must stay in force at all times while the license is active, at the minimums in the table below.

Minimum commercial general liability insurance for ACR contractors (TDLR, checked 2026-11-17)
LicensePer occurrence (property damage and bodily injury)Aggregate (property damage and bodily injury)Aggregate (products and completed operations)
Class A$300,000$600,000$300,000
Class B$100,000$200,000$100,000
If you hold both classes, one policy at the Class A minimums covers both. A license holder employed by another contractor can ask TDLR to waive the insurance requirement, but cannot then contract with the public under that license.

Exam data

Texas HVAC exam pass rates and where candidates lose points

TDLR publishes exam results each fiscal year. From September 2024 to August 2025, 1,483 of 4,176 ACR exams were passed, a 35.51% pass rate. Environmental Air A, the residential and commercial comfort exam with no size limit, passed at 35.86%; Environmental Air B passed at only 26.39%.

TDLR ACR exam results, fiscal years 2025 and 2024 (TDLR, checked 2026-11-17)
ExamPassedFailedPass rate FY2025Pass rate FY2024
Environmental Air A6051,08235.86%38.53%
Environmental Air B35298226.39%25.52%
Commercial Refrigeration A39439549.94%47.54%
Commercial Refrigeration B9315138.11%32.61%
Certified ACR Technician398331.97%33.33%
All ACR exams1,4832,69335.51%35.98%
Passed and failed counts are for FY2025 (September 2024 to August 2025). TDLR's tables count exams sat, so a candidate who retakes appears more than once.

The same TDLR report breaks the Environmental Air A exam into 11 topics worth 120 points in total. First-time candidates averaged 78.2 points, about 65% of the maximum by our arithmetic. The weakest topic was Combustion Air, where first-timers averaged 3.4 of 6 points (57%), followed by Equipment Requirements and Design at 8.8 of 14 (63%). If you are studying, those are the two areas where the state's own numbers say candidates drop marks.

The low Class B pass rate is worth knowing before you choose: the Class B exam has the narrowest scope but, in both years, the lowest pass rate of the contractor exams. Plan for at least one retake inside the one-year application window.

Fees and renewal

How much a Texas HVAC license costs, and how to keep it

TDLR charges $115 to apply for an ACR contractor license and $65 a year to renew, so the TDLR fees for a contractor's first five years add up to $375, before exam and course fees. Each renewal also needs 8 hours of approved continuing education, including one hour on Texas law and rules.

Official TDLR fees we could verify (checked 2026-11-17)
ItemAmountNote
ACR contractor application$115License valid 1 year
ACR contractor renewal$65 a yearPlus 8 hours of CE
Registered technician$20 to apply, $20 to renewNo exam
Certified technician$50 to apply, $35 to renewExam required
Class B to Class A upgrade$25 change fee plus a $74 examination feeNew insurance minimums apply
Late renewal, up to 90 days1.5 times the renewal feeMore than 90 days: 2 times
The $74 examination fee is the figure TDLR gives on its class-upgrade page; the current fee for a first exam is in PSI's candidate bulletin, linked from TDLR's exam page. Five-year total: $115 + 4 renewals x $65 = $375 (our arithmetic from TDLR's fees).
  • No inactive status: TDLR's FAQ says the law and rules do not provide an inactive status, so a license you want to keep must be renewed each year.
  • Expired means stop: you may not engage in air conditioning and refrigeration contracting while your license is expired.
  • Start early: TDLR suggests starting the renewal about 30 to 60 days before expiry.

Cities

Local permits and city rules

Your TDLR license works statewide, but cities still control permits and inspections. Since September 1, 2021, section 1302.304 bars municipalities from charging TDLR-licensed contractors a registration fee, though they may still charge building permit fees. A city may also require you to notify it that you hold a state license.

Before your first install in a new city, check its permit office for the permit types, inspection steps and any notice form it requires; the statute says the notice must be in the form the municipality requires. Work by exempt persons is still subject to any permit, inspection or approval a municipal ordinance requires. If a job involves plumbing, a contractor license does not cover it: the statute bars ACR license holders from work defined as plumbing unless they also hold a plumbing license. See the Texas plumbing license guide, and for electrical work the Texas electrical license guide.

Inspector kneeling by an open crawl-space hatch in the grey shingle siding of a house

Moving to Texas

Licensed in another state?

Texas has HVAC reciprocity with South Carolina and Georgia only. Contractors licensed elsewhere apply on the same $115 application and send their current license and the requirements they met; TDLR then decides which Texas requirements, including the exam, still apply. An out-of-state license alone does not let you offer work in Texas.

TDLR accepts experience earned where licensing rules are substantially equivalent to Texas's. Until you hold a Texas contractor license, TDLR's FAQ says you can subcontract through a Texas licensed contractor and may need a technician registration yourself. For how other states license HVAC businesses, see HVAC license by state and the HVAC contractor license guide.

First jobs

After the license: getting your first HVAC jobs in Texas

With the license and insurance in place, the work is filling the calendar at a margin. Set up your own Google Business Profile and website, price your work before you buy any leads, and judge every lead source by cost per closed job rather than cost per lead.

Licensed and ready for work?

Through the Partner Program, we build and run a local brand for your trade and ZIP codes in Texas. You answer the calls and do the work. The commission is 20% of the labor on service and repair jobs, and 15% of the net on installations and replacements, with no setup fee and no monthly fee: how commission works. You work under your own TDLR license and insurance. We are not a contractor.

FAQ

Texas HVAC license questions

How long does it take to get an HVAC license in Texas?

For the contractor license, the experience takes longest: 48 months of supervised work in the past 72 months, or 36 months plus 12 months as a certified technician. After you apply, you have one year to pass the exam and finish the file. A technician registration needs no experience and no exam.

How much does a Texas HVAC license cost?

TDLR charges $115 to apply for an ACR contractor license and $65 a year to renew. A registered technician pays $20 a year; a certified technician pays $50 to apply and $35 to renew. PSI charges the exam fee separately; TDLR quotes $74 on its class-upgrade page.

What is the difference between a Class A and Class B HVAC license in Texas?

Size. Class A covers any size unit. Class B covers cooling systems of 25 tons and under and heating systems of 1.5 million BTU per hour and under. Class A carries higher insurance minimums: $300,000 per occurrence against $100,000 for Class B.

Can I do HVAC work in Texas without a license?

Not as a business. Knowingly contracting without a license, or doing non-exempt maintenance without a contractor license or technician registration, is a Class C misdemeanor under section 1302.453. Some work is exempt, such as a homeowner's own home; TDLR keeps the list of exemptions.

Do I need EPA 608 certification in Texas?

If you handle refrigerants, yes: the EPA requires Section 608 certification for technicians who maintain, service, repair or dispose of equipment that could release refrigerants. It is a federal credential, separate from the TDLR license, and it does not expire.

Does Texas accept HVAC licenses from other states?

Only through reciprocity with South Carolina and Georgia. Other out-of-state contractors apply like everyone else, with their current license and its requirements attached, and TDLR decides whether they must take the Texas exam.

Next steps

Where to go from here

  • Your trade

    How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.

    See your trade
  • Run your numbers

    A free calculator to check the margin on a job before you price it.

    Open the calculator
  • Working in this state

    Who regulates your trade here, the official sources and where we are recruiting partners.

    See the state page
  • Licensing

    What you need to run a trade business legally, from official sources.

    All licensing guides
  • How the Partner Program works

    We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.

    See the Partner Program
  • Apply to the Partner Program

    Calls from your own area under a local brand. Commission only on closed jobs.

    Apply

Last reviewed: