Skip to content
Hands working a pink calculator over orange and white receipts on a desk, a phone at the edge

Tools

Cost per Lead Calculator: From Cost per Lead to Cost per Closed Job

By· Founder, Made For BuildersReviewed

Cost per lead and cost per closed job calculator

Enter leads per month, what each costs and how many close. You get cost per closed job and monthly spend, next to what commission on the same closed jobs would be.

Run your numbers

Paying per lead vs paying per job

Paying per lead versus paying a commission only when a job closes. Put in what you pay today and see both models side by side.

Example numbers. Change them to yours.

Most of your work is

Labor plus any markup you add to parts. Parts at cost carry no commission.

Buying leads today

$200

per closed job

$1,000 a month for 5 closed jobs

Partner Program

$70

commission per closed job (20 % of labor)

$350 a month if the same 5 jobs came from brand calls

The difference

Difference per job
$130
Difference a month
$650

On these numbers, the commission would be $130 less per closed job than buying leads: $650 a month.

Apply to the Partner Program

Hypothetical example using your numbers, for illustration only. Not a prediction or guarantee of calls, jobs or earnings: we don't guarantee any number of calls. Your results depend on your area, demand, prices and work.

How to calculate cost per lead

Cost per lead equals total spend on a channel divided by the leads that channel produced in the same period. Count every lead you paid for, including the ones you missed or that never answered, because pay-per-lead platforms charge for those too. For per-click channels, spend is clicks times cost per click.

The three numbers, and where each comes from
MetricFormulaExample (round numbers)
Cost per leadSpend ÷ leads$1,000 ÷ 20 leads = $50
Close rateClosed jobs ÷ leads5 jobs ÷ 20 leads = 25%, or 1 in 4
Cost per closed jobCost per lead ÷ close rate, or spend ÷ closed jobs$50 ÷ 0.25 = $200
Lead cost as a share of the jobCost per closed job ÷ average ticket$200 ÷ $500 = 40%
Example numbers, the same as the calculator's starting values. They are not averages.
  • Pay-per-lead platforms. The lead price is set per lead, but your real cost per lead includes leads you could not use. Angi: "You are charged for leads whether or not you open or respond to them" (Angi). On Google Local Services Ads, a missed call is a charged lead when "the customer stays on the line for more than 20 seconds" in business hours (Google).
  • Pay-per-click channels. "You pay for each click on your ads" (Google), so cost per lead is your spend divided by the calls and forms those clicks brought. To turn a daily budget into a month, Google says to "multiply the daily budget by 30.4" (Google).
  • Your own time. For free channels (reviews, referrals) the cost is hours, not dollars. Price them at your hourly rate if you want a like-for-like comparison: plumber hourly rate.

Cost per closed job: the number that matters

Cost per closed job is cost per lead divided by close rate. A $50 lead that closes 1 in 4 costs $200 per job; the same lead at 1 in 2 costs $100. Use your own close rate: no platform publishes one, and the FTC found one lead seller's job-rate claims could not be substantiated.

  1. Tag every lead by source

    In your phone log or CRM, mark where each call or form came from: profile, ads, which platform, referral.

  2. Count closes per source

    After a month, count paid jobs per source. A Thumbtack pro on its community forum put it this way: "I would look at cost per booked job, which services convert best, and which customers become repeat clients." (Thumbtack community)

  3. Divide spend by closed jobs

    Spend on that source in the month divided by the jobs it closed. That is your cost per closed job, and it already includes leads that went nowhere.

Why not use a vendor's close rate

In 2023 the FTC alleged that HomeAdvisor "often tells service providers that its leads result in jobs at rates much higher than it can substantiate" (FTC). Angi's own help center says: "No, Opportunities and leads are not guaranteed jobs" (Angi).

Woman counting dollar bills at a wooden table covered with receipts and a calculator

Worked examples with published lead prices

With Networx's published $14 to $100 per lead and an example close rate of 1 in 4, cost per closed job runs from $56 to $400. A single Thumbtack lead reported at $83.25 costs $249.75 per job at 1 in 3. Against a $1,098 median home EV charger install, those are 5.1% to 36.4% of the job.

Lead price from a published source; close rate is an example (checked 17 November 2026)
Lead price (source)Example close rateCost per closed jobShare of a $1,098 job
$14: Networx, low end (Networx)1 in 4$565.1%
$100: Networx, high end (Networx)1 in 4$40036.4%
$83.25: one Thumbtack lead reported by a pro (Thumbtack community)1 in 3$249.7522.7%
$60: example Local Services Ads lead (Google publishes no price)1 in 3$18016.4%
$1,098 is the median residential EV charger installation in an Idaho National Laboratory dataset of more than 4,800 installs, July 2018 to May 2022 (INL). It is used here only as a published job value. The $83.25 is one pro's lead, not an average.

Monthly budget at Google's suggested minimum. Google recommends "a minimum budget of 10 leads per week" for Local Services Ads (Google). Using Google's own 30.4 days per month, that is about 43 leads a month. At an example $60 per lead, about $2,606 a month before you close a single job.

Same lead, different job. A $180 cost per closed job is 16.4% of a $1,098 install but 60% of an example $300 repair. That is why the calculator asks for your average ticket and job type. Electrician-specific job values: electrician leads.

Cost per lead benchmarks for contractors: what is actually published

Among Google Local Services Ads, Angi, Thumbtack and Networx, only Networx publishes a per-lead price range: $14 to $100. Google and Angi say prices vary with location, job type and demand, and Thumbtack lets you set your own price. We do not reprint industry benchmark tables without a primary source.

What each platform publishes about price per lead (checked 17 November 2026)
PlatformPublished price per leadWhat the platform says
Networx$14 to $100"each lead costing anywhere from $14 to $100 each" (Networx)
Google Local Services AdsNot published"Lead prices may vary depending on your location, the job type, the type of lead, or your bidding mode" (Google)
AngiNot published"Lead fees change based on task, homeowner location, and demand for the work" (Angi)
ThumbtackSet by you"This is the exact amount you'll pay for each lead" (Thumbtack)
More detail per trade: plumbing leads, HVAC leads and contractor leads.

Cost per closed job vs commission on closed jobs

The calculator's second half compares your cost per closed job with the Partner Program's commission, which is charged only on closed jobs: 20% of the labor on service and repair and 15% of the net on installations. On its example numbers, $200 in leads per job compares with $70 in commission.

How the calculator works out commission (example tickets)
JobCommission ruleCommission per job
$500 service ticket, 70% labor (calculator example)20% of labor: 20% × $350$70
$1,098 installation (INL median charger install), excl. sales tax15% of the net: 15% × ($1,098 − $549 materials, equipment and permits; 50% assumed for the example)$82.35
Call that did not become a jobNothing to pay$0
Rates from the commission page. Illustrative, not a forecast of calls or jobs.

Commission has no charge for calls that don't close, so it does not change with your close rate the way lead spend does. On the other hand, it grows with the ticket. Run your own numbers: on some jobs buying leads works out lower. To see what each job leaves you after costs, use the job profit margin calculator.

How to lower your cost per closed job

Raise the close rate before cutting the lead price: answer first, because Angi says most closed leads go to the first pro to make contact. Claim the credits platforms offer, such as Thumbtack's automatic refund when a customer replies to no pro within 72 hours. Drop sources whose cost per closed job stays above what the job leaves you.

  • Answer first. "The majority of closed leads are won by the first pro to contact the homeowner" (Angi).
  • Claim refunds and credits. Thumbtack: "if a customer doesn't reply to any pro they contacted within the first 72 hours, we'll automatically give you a refund for the lead" (Thumbtack). Check each platform's credit rules before you count a lead as spent.
  • Shift spend to owned channels. A profile, reviews and referrals cost no fee per lead: how to get more plumbing leads.

For scale: the BLS puts the median wage of plumbers, pipefitters and steamfitters at $63,800 in May 2025 (BLS). A $400 cost per closed job is more than a day and a half of that median pay, before parts.

Cost per lead: frequently asked questions

How do you calculate cost per lead?

Divide what you spent on a channel by the number of leads it produced in the same period. $1,000 for 20 leads is $50 per lead. Count every lead you were charged for, including missed ones.

What is the difference between cost per lead and cost per acquisition?

Cost per lead counts every enquiry. Cost per acquisition, or cost per closed job, counts only enquiries that became paid work: spend divided by closed jobs. For contractors the second one decides whether a channel pays.

What is a good cost per lead for a contractor?

It depends on the ticket. Compare cost per closed job with what the job leaves you after labor and parts. A $400 cost per closed job can work on a large install and not on a small repair.

How much do home service leads cost?

Networx publishes $14 to $100 per lead. Google Local Services Ads and Angi publish no price and say it varies with location, job type and demand. Thumbtack lets you set the price you pay (all checked 17 November 2026).

Does this calculator store my numbers?

No. It runs in your browser and sends nothing. The figures are illustrative and use only the numbers you enter.

Sources and method

Every published figure and quote on this page was read on the source's own page on 17 November 2026 and saved with a capture. Close rates, the $60 lead and the $300 repair are labeled examples. Divisions are rounded to the cent or to one decimal place. Reviewed every six months.

Next steps

Where to go from here

  • Your trade

    How the Partner Program works for your trade: the jobs, the licensing check and how commission is paid.

    See your trade
  • Run your numbers

    A free calculator to check the margin on a job before you price it.

    Open the calculator
  • Pricing tools

    Calculators for rates, margins and job prices.

    All tools
  • How the Partner Program works

    We build and run a local brand for your trade in your area. The calls ring on your phone and you pay commission only on jobs you close.

    See the Partner Program
  • Apply to the Partner Program

    Calls from your own area under a local brand. Commission only on closed jobs.

    Apply

Last reviewed: